Administrator Guide

Move a Server to a Dierent Server Folder

For convenience, server objects can be organized by folders.

1 If the Storage Manager Client is connected to a Data Collector, select a Storage Center from the Storage view.

2 Click the Storage tab.

3 Select the server in the Storage tab navigation pane.

4 In the right pane, click Edit Settings. The Edit Server Settings dialog box opens.

5 Select the folder to which to move the server in the Server Folder navigation tree.

6 Click OK.

Add One or More HBAs to a Server

To map a volume to a server, the Storage Center must be able to communicate with at least one HBA on the server.

1 Make sure the server HBAs have connectivity with the Storage Center HBAs.

• Fibre Channel – Congure Fibre Channel zoning to allow the server HBAs and Storage Center HBAs to communicate.

• iSCSI – Congure the iSCSI initiator on the server to use the Storage Center HBAs as the target.

• SAS – Directly connect the controller to a server using the SAS front-end connections.

2 If the Storage Manager Client is connected to a Data Collector, select a Storage Center from the Storage view.

3 Click the Storage tab.

4 Select the server in the Storage tab navigation pane.

5 In the right pane, click Add HBAs to Server.

The Add HBAs to Server dialog box opens.

6 Select or dene one or more HBAs for the server.

• If one or more server HBAs are visible to the Storage Center, select the checkboxes of the HBAs for the server in the Select

HBAs to add to server table.

• If a server HBA is not visible to the Storage Center, click Manually Add HBA to dene an HBA manually.

NOTE

: For SAS front-end ports, use the SAS device name as the world wide name to manually add the HBA.

7 Click OK.