Administrator Guide

Figure 21. Remove HBAs from Server
5 Select the checkboxes of the HBAs to remove from the server.
6 Click OK.
If the HBAs are used by one or more mapped volumes, a conrmation dialog box opens.
• To keep the HBAs, click Cancel.
• To remove the HBAs, click OK. Removing the HBAs might cause the server to lose visibility of the mapped volumes.
Mapping Volumes to Servers
Map a volume to a server to allow the server to use the volume for storage.
Map a Volume to a Server
Map a volume to a server to allow the server to use it.
1 If the Storage Manager Client is connected to a Data Collector, select a Storage Center from the Storage view.
2 Click the Storage tab.
3 Select the server in the Storage tab navigation pane.
4 In the right pane, click Map Volume to Server.
The Map Volume to Server wizard opens.
5 In the Volume navigation tree, select the volume you want to map to the server.
6 Click Next.
The Map Volume to Server wizard advances to the next page.
7 (Optional) Click Advanced Options to congure LUN settings, restrict mapping paths, or present the volume as read-only.
8 Click Finish.
Unmap One or More Volumes From a Server
If a server no longer uses a volume, you can unmap the volume from the server.
1 If the Storage Manager Client is connected to a Data Collector, select a Storage Center from the Storage view.
2 Click the Storage tab.
Storage Center Server Administration
163