Administrator Guide

Conguring Storage Center SMTP Settings
SMTP server settings can be congured individually for each Storage Center or applied to multiple Storage Centers.
NOTE: For user interface reference information, click Help.
Congure Storage Center SMTP Server Settings
Congure SMTP settings to allow the Storage Center to send alert message emails to users who have specied a recipient address in their
contact properties.
Prerequisite
The Storage Center must be added to Storage Manager using a Storage Center user with the Administrator privilege.
Steps
1 If the Storage Manager Client is connected to a Data Collector, select a Storage Center from the Storage view.
2 In the Summary tab, click Edit Settings.
The Edit Storage Center Settings dialog box opens.
3 Click the SMTP Server tab.
4 Congure the SMTP server settings.
a Select the Enable SMTP Email checkbox.
b In the SMTP Mail Server eld, type the IP address or fully qualied domain name of the SMTP email server. Click Test Server
to verify connectivity to the SMTP server.
c (Optional) In the Backup SMTP Server eld, type the IP address or fully qualied domain name of a backup SMTP email server.
Click
Test Server to verify connectivity to the SMTP server.
d If the SMTP server requires emails to contain a MAIL FROM address, specify an email address in the Sender Email Address
eld.
e (Optional) In the Common Subject Line eld, type a subject line to use for all emails sent by the Storage Center.
f Congure how the Storage Center identies itself to the SMTP server:
• To use SMTP, type the Storage Center fully qualied domain name in the Hello Message (HELO) eld.
• To use ESMTP, select the Send Extended Hello (EHLO) checkbox, then type the Storage Center fully qualied domain
name in the Extended Hello Message (EHLO) eld.
5 Click OK.
Apply SMTP Settings to Multiple Storage Centers
SMTP settings that are assigned to a single Storage Center can be applied to other Storage Centers.
Prerequisite
The Storage Center must be added to Storage Manager using a Storage Center user with the Administrator privilege.
Steps
1 If the Storage Manager Client is connected to a Data Collector, select a Storage Center from the Storage view.
2 In the Summary tab, click Edit Settings.
The Edit Storage Center Settings dialog box opens.
3 Click the SMTP Server tab.
4 Select the Apply these settings to other Storage Centers checkbox.
5 Click Apply.
The Select Storage Center dialog box opens.
6 Select the checkbox for each Storage Center to which you want to apply the settings.
Storage Center Maintenance
237