Administrator Guide
Related link
Test Network Connectivity for an iSCSI Port
Remove Ports from an iSCSI Fault Domain
Before you repurpose one or more front-end iSCSI ports, remove them from the fault domains to which they belong.
1 If the Storage Manager Client is connected to a Data Collector, select a Storage Center from the Storage view.
2 Click the Storage tab.
3 In the Storage tab navigation pane, expand Fault Domains, then expand iSCSI and click the fault domain.
4 In the right pane, click Edit Settings.
The Edit Fault Domain Settings dialog box opens.
5 In the Ports table, click Remove Ports from Fault Domain.
The Remove Ports from Fault Domain dialog box opens.
6 In the Select the ports to remove table, select the iSCSI ports to remove from the fault domain.
7 Click OK to close the Remove Ports from Fault Domain dialog box.
8 Click OK.
Delete an iSCSI Fault Domain
Delete an iSCSI fault domain if all ports have been removed and it is no longer needed.
Prerequisites
• The Storage Center iSCSI front-end IO ports must be congured for legacy mode. In virtual port mode, fault domains cannot be
deleted.
• The fault domain must contain no iSCSI ports.
Steps
1 If the Storage Manager Client is connected to a Data Collector, select a Storage Center from the Storage view.
2 Click the Storage tab.
3 In the Storage tab navigation pane, expand Fault Domains→ iSCSI, then select the fault domain.
4 In the right pane, click Delete. The Delete Fault Domain dialog box appears.
5 Click OK.
Conguring NAT Port Forwarding for iSCSI Fault Domains
Port forwarding allows iSCSI initiators (servers or remote Storage Centers) located on a public network or dierent private network to
communicate with
Storage Center iSCSI ports on a private network behind a router that performs Network Address Translation (NAT).
For each Storage Center iSCSI control port and physical port, the router performing NAT must be congured to forward connections
destined for a unique public IP address and TCP port pair to the private IP address and TCP port for the iSCSI port. These port forwarding
rules must also be congured in parallel on the Storage Center fault domains to make sure that iSCSI target control port redirection
functions correctly. Fault domains can only be modied by administrators.
NOTE
: If Storage Center iSCSI ports are congured for legacy mode, the port forwarding rules do not need to be dened on the
Storage Center because there is no control port redirection.
280 Storage Center Maintenance