Administrator Guide

Change the Client VIPs for a Client Network
Change the client VIPs through which clients will access SMB shares and NFS exports.
1 Click the Storage view and select a FluidFS cluster.
2 Click the File System tab.
3 In the File System tab navigation pane, expand Tenants and select a tenant.
4 Select Client Accessibility.
5 In the right pane, select the DNS and Public IPs tab. In the Public IPs pane, click Edit Settings. The Edit Public IPs Settings dialog
box appears.
6 To add a client VIP:
a In the VIP area, enter a client virtual IP address in the box next to Add, and then click Add.
b Click OK.
7 To remove a client VIP:
a Select a client VIP.
b Click Remove.
NOTE: A client network must have at least one client VIP.
8 Click OK.
Change the NAS Controller IP Addresses for a Client Network
Change the NAS controller IP addresses for a client network.
1 In the Storage view, select a FluidFS cluster.
2 Click the File System tab.
3 In the File System view, select Cluster Connectivity.
4 Click the Client Network tab.
5 In the Client Network panel, click Edit Settings. The Edit Client Network Settings dialog box opens.
6 In the NAS Controllers IP Addresses eld, select a NAS controller and then click Edit Settings. The Edit Controller IP Address dialog
box opens.
7 In the IP Address eld, type an IP address for the NAS controller.
8 Click OK.
Delete a Client Network
Delete a client network if clients no longer need to access SMB shares and NFS exports on that network. You cannot delete the Primary
subnet.
1 In the Storage view, select a FluidFS cluster.
2 Click the File System tab.
3 In the File System view, select Cluster Connectivity.
4 Click the Client Network tab.
5 In the Client Network panel, select a client network and then click Delete. The Delete dialog box opens.
6 Click OK.
378
FluidFS Administration