Administrator Guide

Figure 2. Storage Manager Client Login
3 To change the language displayed in the Storage Manager Client, select a language from the Display Language drop-down menu.
4 Type the user name and password in the User Name and Password elds.
5 Specify your credentials.
• If you want to log on as a local Storage Manager user, Active Directory user, or OpenLDAP user, type the user name and password
in the User Name and Password elds.
– For OpenLDAP, the user name format is supported (example: user).
– For Active Directory, the user name (example: user), User Principal Name (example: user@domain), and NetBIOS ID (example:
domain\user) user name formats are supported.
• If you want to log on automatically using your Windows session credentials, select the Use Windows Credentials check box.
6 In the Host/IP eld, type the host name or IP address of the server that hosts the Data Collector. If the Data Collector and Client are
installed on the same system, you can type localhost instead.
7 If you changed the Web Server Port during installation, type the updated port in the Web Server Port eld.
8 Click Log In. The Client connects to the Data Collector and displays the Storage view.
NOTE
: If the Display Language does not match the preferred language of the user, a warning message appears.
40 Getting Started