Administrator Guide

Limitations
The following limitations apply to replication throttling:
• The maximum number of active outgoing replications is 10. If more than 10 replications are active, they are queued.
• The maximum number of active incoming replications is 100. If more than 100 replications are active, they are queued.
• The maximum number of replication partners is 100.
• The maximum number of replicated NAS volumes or containers (source and target) on a cluster is 1024.
• The maximum number of replication schedules per system is 1024.
Dene a QoS Node
Create a QoS (Quality of Service) denition to bind a QoS node (network level) of outgoing trac to a replication.
1 In the Storage view, select a FluidFS cluster.
2 Click the File System tab.
3 In the File System view, click Replications.
4 Click the Replication QoS Nodes tab.
5 Click Create QoS Node.
The Create Replication QoS Node dialog box opens.
6 Type a name and choose the bandwidth limit for the node in KB/s.
7 Click OK.
The Edit Replication QoS Schedule dialog box opens.
8 Drag the mouse to select an area, right-click on it, and choose the percentage of the bandwidth limit to allow in these day and hour
combinations.
9 Click OK.
Change a QoS Node
Change a QoS (Quality of Service) node (network level) of outgoing trac bound to a replication.
1 In the Storage view, select a FluidFS cluster.
2 Click the File System tab.
3 In the File System view, click Replications.
4 Click the Replication QoS Nodes tab.
5 Right-click on a QoS and select Edit Settings.
The Edit Replication QoS Settings dialog box opens.
6 Change the name and/or the bandwidth limit for the node in KB/s.
7 Click OK.
The Edit Replication QoS Schedule dialog box opens.
8 Drag the mouse to select an area, right-click on it, and choose the percentage of the bandwidth limit to allow in these day and hour
combinations.
9 Click OK.
Congure Replication Throttling
Use replication throttling to ne-tune network bandwidth usage for replication of a pair of NAS volumes between two clusters.
1 In the Storage view, select a FluidFS cluster.
2 Click the File System tab.
3 In the File System view, click Replications.
4 Click the Replication NAS Volumes tab, select a replication, and then right-click.
FluidFS Administration
463