Administrator Guide

Change a Replication Schedule
Change the frequency that replication runs for a replication schedule.
1 In the Storage view, select a FluidFS cluster.
2 Click the File System tab.
3 In the File System view, expand NAS Volumes and select a NAS volume.
4 Click the Replication tab.
5 Select a replication schedule and click Edit Settings.
The Edit Replication Schedule Settings dialog box opens.
6 Specify when to run replication:
• To run replication based on a period of time, select the Replicate every checkbox and type the frequency in minutes, hours, days,
or weeks.
• To run replication based on day and time, select the Replicate on checkbox and select one or more days and times.
7 Click OK.
Delete a Replication Schedule
Delete a replication schedule if you no longer want replication to run regularly. You can delete a replication schedule only from the source
FluidFS cluster.
1 In the Storage view, select a FluidFS cluster.
2 Click the File System tab.
3 In the File System view, expand NAS Volumes and select a NAS volume.
4 Click the Replications tab.
5 Select a replication schedule and click Delete.
The Delete dialog box opens.
6 Click OK.
Pause Replication
When you pause replication, any replication operations for the NAS volume that are in progress are suspended. While replication is paused,
scheduled replications do not take place. If you require multiple replications to be paused, perform the following steps for each replication.
You can pause replication only from the source
FluidFS cluster.
1 In the Storage view, select a FluidFS cluster.
2 Click the File System tab.
3 In the File System view, expand NAS Volumes and select a NAS volume.
4 Click the Replications tab.
5 In the Replication Status area, click Pause .
The Pause Replication dialog box opens.
6 Click OK.
Resume Replication
When you resume replication, any replication operations that were in progress at the time the operation was paused will resume. In addition,
any replication schedules will resume at their next scheduled time. Replication can be resumed for individual NAS volumes. You can resume
replication only from the source FluidFS cluster.
1 In the Storage view, select a FluidFS cluster.
2 Click the File System tab.
3 In the File System view, expand NAS Volumes and select a NAS volume.
FluidFS Administration
467