Administrator Guide

NOTE: For some of the options, there are parameters that might be required, such as Client/IP, User path.
Steps
1 In the Storage view, select a FluidFS cluster.
2 Click the File System tab.
3 In the File System tab navigation pane, select Cluster Maintenance.
4 In the right pane, click the Support tab.
5 In the Diagnostic Tools area, click Run Diagnostic. The Run Diagnostic wizard opens.
6 Select the type of diagnostic to run.
7 Select the secondary type (authentication or le access).
8 Click Next. The Run Diagnostics dialog box opens.
9 Select a Tenant from the drop-down list.
10 Enter the Client IP Address.
11 Enter or change the User Path.
12 Click Next.
13 Specify how you want to access the diagnostic les (NFS, SMB, or FTP).
14 Select the les to send to SupportAssist (summary les only, or summary and log les). Click Run.
15 After the diagnostics have been run, Storage Manager will send diagnostic data using SupportAssist.
Run Embedded System Diagnostics on a NAS Controller
The embedded system diagnostics (also known as Enhanced Pre-boot System Assessment (ePSA) diagnostics) provide a set of options for
particular device groups or devices.
Prerequisite
Connect a monitor to a NAS controller VGA port and connect a keyboard to one of the NAS controller USB ports.
About this task
The embedded system diagnostics allow you to:
• Run tests automatically or in an interactive mode
• Repeat tests
• Display or save test results
• Run thorough tests to introduce additional test options to provide extra information about the failed device(s)
• View status messages that inform you whether tests are completed successfully
• View error messages that inform you of problems encountered during testing
If a major component or device in the system does not operate properly, running the embedded system diagnostics might indicate
component failure. To run embedded system diagnostics, a NAS controller must be oine, which means it is not serving data.
The following table summarizes the embedded system diagnostics menu options.
Menu
Description
Conguration Displays the conguration and status information of all detected devices.
Results Displays the results of all tests that are executed.
System Health Provides the current overview of the system performance.
Event Log Displays a time-stamped log of the results of all tests run on the system. This is displayed if at least one event
description is recorded.
Steps
1 Press and release the recessed power button at the back of the NAS controller to shut down the NAS controller.
FluidFS Administration
493