Administrator Guide

Replication Target File System is Busy
Description Replication between the source NAS volume and the target NAS volume fails because the target FluidFS
cluster le system is temporarily unavailable to serve the required replication.
Cause Replication fails because the target FluidFS cluster is temporarily unavailable to serve the required replication.
Workaround The replication continues automatically when the le system releases part of the resources. Verify that the
replication continues automatically after a period of time (an hour).
Replication Target is Down
Description Replication between the source NAS volume and the target NAS volume fails because the target NAS volume
is down.
Cause Replication fails because the le system of the target NAS volume is down.
Workaround Check whether the le system is down in the target system. If the FluidFS cluster le system is not
responding, you must start the le system on the target FluidFS cluster. The replication continues
automatically after the le system starts.
Replication Target is Not Optimal
Description Replication between the source NAS volume and the target NAS volume fails because the target NAS volume
is not optimal.
Cause Replication fails because the le system of the target NAS volume is not optimal.
Workaround Check the system status of the target system to understand why the le system is not optimal. The replication
continues automatically after the le system recovers.
Replication Target Volume is Busy Reclaiming Space
Description
Replication between the source NAS volume and the target NAS volume fails because the target NAS volume
is busy freeing up space.
Cause Replication fails because the target NAS volume is busy freeing up space.
Workaround The replication continues automatically when the space is available. Verify that the replication automatically
continues after a period of time (an hour).
Replication Target Volume is Detached
Description
Replication between the source NAS volume and the target NAS volume fails because the target NAS volume
is detached from the source NAS volume.
Cause Replication fails because the target NAS volume was previously detached from the source NAS volume.
Workaround Perform the detach action on the source NAS volume. If required, reattach both NAS volumes in a replication
relation.
FluidFS Administration 507