Administrator Guide

Conguring Data Collector Settings
Use Unisphere Central to congure and update Data Collector properties and settings.
Conguring General Settings
The Data Collector General settings include a conguration summary, security, settings, port identication and database selection.
Restart the Data Collector
Use Unisphere to stop and restart the Data Collector.
1 Connect to the Data Collector.
a Open a web browser.
b Type the address of the Data Collector in the web browser using the following format:
https://data_collector_host_name_or_IP_address:3033/
c Press Enter.
The Storage Manager login page is displayed.
d Type the user name and password of a Data Collector user with Administrator privileges in the User Name and Password eld.
e Click Log In.
2
If a Storage Center is selected from the drop-down list, click (Home) in the left navigation pane.
3 Click Data Collector.
The Data Collector view is displayed.
4 Click the General tab, and then select the Summary subtab.
5 Click OK.
The Data Collector Restart dialog box opens.
6 Click Yes.
The Data Collector service stops and restarts.
Enable the Chargeback Feature
To enable the Chargeback feature, add a Chargeback license le or product key to the Data Collector.
1 Connect to the Data Collector.
a Open a web browser.
b Type the address of the Data Collector in the web browser using the following format:
https://data_collector_host_name_or_IP_address:3033/
c Press Enter.
The Storage Manager login page is displayed.
d Type the user name and password of a Data Collector user with Administrator privileges in the User Name and Password eld.
e Click Log In.
2
If a Storage Center is selected from the drop-down list, click (Home) in the left navigation pane.
3 Click Data Collector.
The Data Collector view is displayed.
4 Click the General tab, and then click the Summary subtab.
662
Data Collector Management