Administrator Guide

ManualsBrandsDell ManualsCompellent (SCStorage SCv2000

661

662

663

664

665

666

667

668

669

670

Set the Maximum Server Memory Usage

Use the Edit Advanced Settings dialog to set the maximum amount of memory that the Data Collector may use.

About this task

NOTE: The Data Collector must be restarted to save server memory changes.

Steps

1 Connect to the Data Collector.

a Open a web browser.

b Type the address of the Data Collector in the web browser using the following format:

https://data_collector_host_name_or_IP_address:3033/

c Press Enter.

The Storage Manager login page is displayed.

d Type the user name and password of a Data Collector user with Administrator privileges in the User Name and Password eld.

e Click Log In.

2 If a Storage Center is selected from the drop-down list, click (Home) in the left navigation pane.

Click Data Collector.

The Data Collector view is displayed.

4 Click the General tab, and then click the Summary subtab.

5 Expand the Advanced area located below the License Information section.

6 Click Edit.

The Edit Advanced Settings dialog box opens.

7 Type the amount of memory in MB to allocate for the Data Collector in the Maximum Server Memory Usage box.

8 Click OK.

The Data Collector Restart dialog box opens.

9 Click Yes.

The Data Collector service stops and restarts.

Select a Network Adapter

The Data Collector attempts to automatically select the network adapter to use by default. If the host server has multiple network

adapters, automatic detection can fail and the network adapter must be selected manually.

Prerequisite

The network adapter must have connectivity to the devices managed by Storage Manager Client.

NOTE

: The Data Collector must be restarted to save network adapter changes.