Administrator Guide

Congure SMTP Server Settings
The SMTP server settings must be congured to allow Storage Manager to send notication emails.
1 Connect to the Data Collector.
a Open a web browser.
b Type the address of the Data Collector in the web browser using the following format:
https://data_collector_host_name_or_IP_address:3033/
c Press Enter.
The Storage Manager login page is displayed.
d Type the user name and password of a Data Collector user with Administrator privileges in the User Name and Password eld.
e Click Log In.
2 If a Storage Center is selected from the drop-down list, click (Home) in the left navigation pane.
3
Click Data Collector.
The Data Collector view is displayed.
4 Click the Environment tab and, then click the SMTP Server subtab.
5 Click Edit.
The SMTP Server Conguration dialog box opens.
6 Congure the SMTP server settings by performing the following steps:
a In the From Email Address eld, type the email address to display as the sender of emails from the Data Collector.
b In the Host or IP Address eld, type the host name or IP address of the SMTP server.
c If the port number of the SMTP server is not 25, type the correct port number in the Port eld.
d If the SMTP server requires authentication, select the Authentication checkbox, then type the user name and password in the
SMTP User Name and SMTP User Password elds.
7 Click OK.
Congure Server Usage Data Update Frequency
Congure the Server Agent to update usage data every 30 minutes.
1 Connect to the Data Collector.
a Open a web browser.
b Type the address of the Data Collector in the web browser using the following format:
https://data_collector_host_name_or_IP_address:3033/
c Press Enter.
The Storage Manager login page is displayed.
d Type the user name and password of a Data Collector user with Administrator privileges in the User Name and Password eld.
e Click Log In.
2
If a Storage Center is selected from the drop-down list, click (Home) in the left navigation pane.
3 Click Data Collector.
The Data Collector view is displayed.
4 Click the Environment tab, and then click the Server Agent subtab.
5 Click Edit.
The Server Agent dialog box opens.
6 Select the Periodically Update Usage Data checkbox.
When selected, server usage data is updated every 30 minutes.
670
Data Collector Management