Administrator Guide

7 Type the number of days of usage data to include in the Usage Data Range eld
8 Click OK.
Conguring Monitoring Settings
The Monitoring settings include SupportAssist access and conguration, automated report generation, data collection settings, and
support data conguration.
Congure a Proxy Server for a Data Collector
Congure the proxy server settings to allow the Data Collector to use a proxy server when sending diagnostic data using SupportAssist.
1 Connect to the Data Collector.
a Open a web browser.
b Type the address of the Data Collector in the web browser using the following format:
https://data_collector_host_name_or_IP_address:3033/
c Press Enter.
The Storage Manager login page is displayed.
d Type the user name and password of a Data Collector user with Administrator privileges in the User Name and Password eld.
e Click Log In.
2
If a Storage Center is selected from the drop-down list, click (Home) in the left navigation pane.
3 Click Data Collector.
The Data Collector view is displayed.
4 Click the Monitoring tab, and then click the SupportAssist subtab.
5 Expand the Proxy Server area.
6 Click Edit in the Proxy Server area.
The Network Proxy Conguration dialog box opens.
7 Select the Enabled checkbox to enable the proxy server.
NOTE
: The proxy server must be enabled to congure the settings.
8 Type the host name or IP address of the proxy server in the Host or IP Address eld.
9 Type the port number of the proxy server in the Port eld.
10 If the proxy server requires a user name and password, type a user name and password in the User Name and Password elds.
11 Click OK.
The Change Values dialog box opens, which states that the Data Collector service must be stopped and restarted.
12 Click Yes.
The Data Collector service stops and restarts.
Storage Center Automated Reports
The information that Storage Center displays in an automated report depends on the congured Automated Report settings.
Report Frequency – Automated reports are generated at the end of each day, week, or month, depending on the options selected in
Automated Reports from the Storage Center Settings area. You can also generate automated reports manually, at any time.
The following table lists the available Storage Center reports related to volumes, servers, and disks:
Data Collector Management
671