Administrator Guide
A conrmation dialog box is displayed.
8 Click Yes.
Managing the Storage Manager Virtual Appliance
The Storage Manager Virtual Appliance console includes conguration options that allow you to congure network settings, view diagnostic
data, and update the Storage Manager Virtual Appliance.
Log in to the Storage Manager Virtual Appliance CLI
1 Using the VMware vSphere Client, launch the console for the Storage Manager Virtual Appliance.
2 At the login prompt, type em and press Enter.
3 At the EM Username prompt, type the user name of the Data Collector local admin user and press Enter.
4 At the EM Password prompt, type the password of the Data Collector local admin user and press Enter.
The Storage Manager Virtual Appliance CLI is displayed.
Congure Virtual Appliance Settings
Use the Conguration menu in the Storage Manager Virtual Appliance CLI to change network and partition settings for the Storage
Manager Virtual Appliance.
Congure an NTP Server
A network time protocol (NTP) server provides the time and date to the Storage Manager Virtual Appliance.
Prerequisite
The NTP server must be accessible from the Storage Manager Virtual Appliance.
Steps
1 Using the VMware vSphere Client, launch the console for the Storage Manager Virtual Appliance.
2 Log in to the Storage Manager Virtual Appliance CLI.
3 Press 2 and Enter to enter the Conguration menu.
4 Press 1 and Enter to enter the NTP menu.
5 Press 1 and Enter to launch the NTP setup.
6 Type the IP address or host name of an NTP server.
7 Press Enter.
Congure IPv4 Settings
Use the Storage Manager Virtual Appliance console to modify the IPv4 network settings.
1 Using the VMware vSphere Client, launch the console for the Storage Manager Virtual Appliance.
2 Log in to the Storage Manager Virtual Appliance CLI.
3 Press 2 and Enter to display the Conguration menu.
4 Press 2 and Enter to start the Network IPv4 setup.
5 Press 1 or 2 to enable or disable DHCP, then press Enter.
6 To modify the IP address, type an IP address, and then press Enter.
7 To modify the netmask, type a new netmask, and then press Enter.
Data Collector Management
681