Administrator Guide

a Open a web browser.

b Type the address of the Data Collector in the web browser using the following format:

https://data_collector_host_name_or_IP_address:3033/

c Press Enter.

The Storage Manager login page is displayed.

d Type the user name and password of a Data Collector user with Administrator privileges in the User Name and Password eld.

e Click Log In.

2 If a Storage Center is selected from the drop-down list, click (Home) in the left navigation pane.

3 Click Data Collector.

The Data Collector view is displayed.

4 Click the Users & System tab and then select the Users & User Groups subtab.

5 Select the Storage Manager user group to which you want to add a directory user.

6 Click Add Directory Users.

The Add Directory Users dialog box opens.

7 In the Directory Users eld, type the name of each directory user that you want to add.

• For OpenLDAP, the user name format is supported (example: user).

• For Active Directory, the following user name formats are supported:

– User name (example: user)

– User Principal Name (example: user@domain)

NOTE

: To add users that belong to a domain other than the domain for which the Data Collector is congured, use the

User Principal Name format.

8 Click Check Names to verify that the specied users exist in the directory service. A message appears.

NOTE

: Checking names is not supported on domains for which a one-way trust is congured.

9 Click OK to close the message.

10 If any of the specied directory user names could not be veried, correct the names and then click Check Names again.

11 When you are nished, click OK. The Add Directory Users dialog box closes, and the directory users that are associated with the

selected Storage Manager user group appear on the User Groups subtab.