Administrator Guide

Steps
1 Connect to the Data Collector.
a Open a web browser.
b Type the address of the Data Collector in the web browser using the following format:
https://data_collector_host_name_or_IP_address:3033/
c Press Enter.
The Storage Manager login page is displayed.
d Type the user name and password of a Data Collector user with Administrator privileges in the User Name and Password eld.
e Click Log In.
2 If a Storage Center is selected from the drop-down list, click (Home) in the left navigation pane.
3
Click Data Collector.
The Data Collector view is displayed.
4 Click the Users & System tab, then select the Password Conguration subtab.
5 Click Edit. The Password Conguration dialog box opens.
6 Select the Reset Aging Clock checkbox.
7 Click OK.
Related link
Congure Local Storage Manager User Password Requirements
Require Users to Change Passwords
The new password requirements apply to new user passwords only. Existing user passwords may not follow the password requirements.
Require users to change passwords at next login so that the password complies with the password requirements.
Prerequisite
Password Conguration must be enabled.
Steps
1 Connect to the Data Collector.
a Open a web browser.
b Type the address of the Data Collector in the web browser using the following format:
https://data_collector_host_name_or_IP_address:3033/
c Press Enter.
The Storage Manager login page is displayed.
d Type the user name and password of a Data Collector user with Administrator privileges in the User Name and Password eld.
e Click Log In.
2
If a Storage Center is selected from the drop-down list, click (Home) in the left navigation pane.
3 Click Data Collector.
The Data Collector view is displayed.
4 Click the Users & System tab, then select the Password Conguration subtab.
5 Click Edit. The Password Conguration dialog box opens.
6 Select the Requires Password Change checkbox.
7 Click OK.
Related link
Congure Local Storage Manager User Password Requirements
Storage Manager User Management
701