Administrator Guide

The Conrm Enable SupportAssist dialog box opens.

4 Click Yes.

Validate SupportAssist Connection

If the storage system is running Storage Center 7.3 or later, the Validate SupportAssist Connection page opens.

The Validate SupportAssist Connection page displays a summary of the SupportAssist contact information and conrms that the Storage

Center is connected to SupportAssist.

• Click Next.

Update Storage Center

The Storage Center attempts to contact the SupportAssist Update Server to check for updates. If you are not using SupportAssist, you

must use the Storage Center Update Utility to update the Storage Center operating system before continuing.

• If no update is available, the Storage Center Up to Date page appears. Click Next.

• If an update is available, the current and available Storage Center versions are listed.

a Click Install to update to the latest version.

b If the update fails, click Retry Update to try to update again.

c When the update is complete, click Next.

• If the SupportAssist Data Collection and Storage Agreement was not accepted, the Storage Center cannot check for updates.

– To proceed without checking for an update, click Next.

– To accept the agreement and check for an update:

a Click Accept SupportAssist Data Collection and Storage Agreement to review the agreement.

b Select By checking this box you accept the above terms.

c Click Next. The Storage Center attempts to contact the SupportAssist Update Server to check for updates.

• The Setup SupportAssist Proxy Settings dialog box appears if the Storage Center cannot connect to the SupportAssist Update

Server. If the site does not have direct access to the Internet but uses a web proxy, congure the proxy settings:

a Select Enabled.

b Enter the proxy settings.

c Click OK. The Storage Center attempts to contact the SupportAssist Update Server to check for updates.

Complete Conguration and Perform Next Steps

The Storage Center is now congured. The Conguration Complete page provides links to a Storage Manager Client tutorial and wizards to

perform the next setup tasks.

1 (Optional) Click one of the Next Steps to congure a localhost, congure a VMware host, or create a volume.

When you have completed the step, you are returned to the Conguration Complete page. After you nish the Next Steps, continue

to Step 2.

2 Click Finish to exit the wizard.