Administrator Guide
8 Click Log In. The Client connects to the Storage Center and indicates that initial conguration is necessary.
9 Type a new password in the New Password and Conrm Password elds.
10 Click OK. The Congure Storage Center wizard opens.
11 Make sure that you have the required information that is listed on the rst page of the wizard. This information is needed to congure
the
Storage Center.
12 Click Next. The Submit Storage Center License page opens.
Welcome Page
Use the Welcome page to verify the Storage Center information, and optionally change the name of the Storage Center.
1 Verify that the Service Tag and serial number match the Storage Center to set up.
2 (Optional) Type a name for the Storage Center.
3 Click Next.
Set System Information
The Set System Information page allows you to enter Storage Center and storage controller conguration information to use when
connecting to the Storage Center using Storage Manager.
1 Type a descriptive name for the Storage Center in the Storage Center Name eld.
2 Select the Network Conguration Source (Storage Center 7.3 and later).
• DHCP IPv4 – Selected by default. IP addresses will be discovered and assigned.
• Static – Enter static IP addresses manually.
3 If the network conguration source is set to Static:
a Type the system management IPv4 address for the Storage Center in the Virtual Management IPv4 Address eld.
The management IPv4 address is the IP address used to manage the Storage Center and is dierent than a storage controller
IPv4 address.
b Type an IPv4 address for the management port of each storage controller.
NOTE
: The storage controller IPv4 addresses and management IPv4 address must be within the same subnet.
c Type the subnet mask of the management network in the Subnet Mask eld.
d Type the gateway address of the management network in the Gateway IPv4 Address eld.
e Type the domain name of the management network in the Domain Name eld.
f Type the DNS server addresses of the management network in the DNS Server and Secondary DNS Server elds.
4 Click Next.
Submit the Storage Center License
Use the Submit Storage Center License page to type the name and title of the approving customer and to select the Storage Center
license le.
1 Click Browse.
The Select License File window opens.
2 Browse to the location of the license le, select the le, and then click Select.
3 Verify the approving customer information and license le path, then click Next.
The Create Disk Folder page opens.
86
Storage Center Deployment