Administrator Guide

NOTE: If you chose to clear the By checking this box, you accept the above terms and turn on SupportAssist checkbox, a
SupportAssist Recommended dialog box opens.
• To return to the Accept SupportAssist Collection Agreement page, click No.
• To opt out of SupportAssist, click Yes.
Provide Contact Information
Specify contact information for technical support to use when sending support-related communications from SupportAssist.
1 Specify the contact information.
2 (Storage Center 7.2 or earlier) To receive SupportAssist email messages, select the Send me emails from SupportAssist when issues
arise, including hardware failure notications check box.
3 Select the preferred contact method, language, and available times.
4 (Storage Center 7.2 or earlier) Type a shipping address where replacement Storage Center components can be sent.
5 (Storage Center 7.2 or earlier) Click Finish.
6 (Storage Center 7.3 or later) Click Next.
Provide Site Contact Information
If you are running Storage Center 7.3 or later, specify contact information for technical support to use when sending support-related
communications from SupportAssist to the site where the system is installed.
1 Select the Enable Onsite Address checkbox.
2 Type a shipping address where replacement Storage Center components can be sent.
3 Click Next.
The Conrm Enable SupportAssist dialog box opens.
4 Click Yes.
Validate SupportAssist Connection
If the storage system is running Storage Center 7.3 or later, the Validate SupportAssist Connection page opens.
The Validate SupportAssist Connection page displays a summary of the SupportAssist contact information and conrms that the Storage
Center is connected to SupportAssist.
• Click Next.
Complete Conguration and Perform Next Steps
The Storage Center is now congured. The Conguration Complete page provides links to a Storage Manager Client tutorial and wizards to
perform the next setup tasks.
1 (Optional) Click one of the Next Steps to congure a localhost, congure a VMware host, or create a volume.
When you have completed the step, you are returned to the Conguration Complete page. After you nish the Next Steps, continue
to Step 2.
2 Click Finish to exit the wizard.
98
Storage Center Deployment