Deployment Guide

Figure 75. Attach Label to Cable
2. Wrap the label around the cable until it fully encircles the cable. The bottom of each label is clear so that it does not obscure
the text.
Figure 76. Wrap Label Around Cable
3. Apply a matching label to the other end of the cable.
Adding a Single Expansion Enclosure to a Chain Currently in Service
Use caution when adding an expansion enclosure to a live Storage Center system to preserve the integrity of the existing data.
Prerequisites
Install the expansion enclosure in a rack, but do not connect the expansion enclosure to the storage system. For more information,
see the Dell Storage Center SC100/SC120 Expansion Enclosure Getting Started Guide.
About this task
To add an expansion enclosure to an existing chain, connect the expansion enclosure to the end of the chain.
Steps
1. Connect to the Storage Center using the Dell Storage Manager Client.
2. Check the disk count of the Storage Center system before adding the expansion enclosure.
3. Click the Hardware tab and select Enclosures in the Hardware tab navigation pane.
4. Click Add Enclosure. The Add New Enclosure wizard starts.
a. Confirm the details of your current install and click Next to validate the existing cabling.
b. Select the enclosure type and click Next.
c. If the drives are not installed, install the drives in the expansion enclosure.
88
Adding or Removing an Expansion Enclosure