Setup Guide

Viewing Update Package Details
When a downloaded update package is ready to install, you can view details for the package before
installing it.
1. From the Storage Management menu, select System→ Update→ Update Status. The Update Status
wizard starts.
2. Click Details. The Update Details page appears. This page provides details for all components
included in the update package.
Figure 2. Update Details Page
Table 6. Update Package Details
Column Description
Component Name of component to update.
Type Type of component to update:
• Storage Center: Updates Storage Center software.
• Enclosure: Updates enclosure firmware.
• Disk: Updates disk firmware.
Version Version number of the update component.
Status Status of the component update:
• Ready for Update: Component is ready for update.
• Installed: Component has been installed.
Update Count Number of components on the Storage Center to which the
update component applies. For example, for a controller
firmware update, the count is 1 for a single-controller Storage
Center and 2 for a dual-controller Storage Center.
Update Type Indicates whether the installation of the update component is
required or deferrable:
• Required: Update must be applied. For a single-controller
Storage Center, the update component affects service.
Getting Started
11