Reference Guide
Command Reference
The commands featured in this section perform common management operations from the Storage Center Command Utility. Each
command consists of the command name and options. This section lists all of the commands available for use in the Command Utility and
their options.
alert acknowledge
Description
Marks a Storage Center alert as having been acknowledged. Acknowledgment indicates to the Storage Center that you have read the alert
message and are aware of the problem. The following alert types can be acknowledged:
• Alert: This type of alert represents current issues on the Storage Center that are being actively monitored. These alerts clear
automatically when the situation that caused them is corrected. Once cleared, a record of the alert can be found under History alerts.
• History: This type of alert allows you to keep a record of past conditions that have occurred on the Storage Center. History alerts can
be acknowledged to indicate that you have read the alert and are aware of the problem. The process of acknowledging a History alert
causes the alert to be removed from the Storage Center. Once the alert is removed, it cannot be recovered.
• Indication: Indication alerts are for informational purposes only. They show conditions on the Storage Center that may require user
intervention. The process of acknowledging an Indication alert causes the alert to be removed from the Storage Center. Once the alert
is removed, it cannot be recovered.
• Maintenance: Maintenance alerts can occur when the Storage Center Operation Mode is set to Install, Maintenance, or Pre-
Production. This category exists to isolate these alerts from alerts that occur during normal operation. Maintenance alerts can be
acknowledged to indicate to the Storage Center that you have read the alert and are aware of the problem.
Format
alert acknowledge –controller integer –index integer {options}
Options
–controller integer
Species the index of the controller for the alert.
–h
Shows help for command options.
–index integer
Species the index of the alert.
2
Command Reference 19