Reference Guide

Shows help for command options.
–index integer
Species the server index.
–manual
Optional ag to congure the requested HBAs before they are discovered. If the WWN matches a known server port, then this ag is
ignored. If this ag is present, then –porttype must also be specied.
–name string
Species the server name. Names that contain spaces must be enclosed in single quotes.
–porttype string
Species the transport type for all HBAs being added. This option is required if the –manual ag is set. Valid values are:
• FibreChannel
• iSCSI
–WWN string
Species one or more HBA world wide names (WWNs) for the server. Multiple names are delimited by commas (,) and names that contain
spaces must be enclosed in single quotes.
NOTE: Storage Center supports use of WWNs and iSCSI Names. iSCSI Names may follow iSCSI Qualied Name (IQN) format,
but they are not required to do so.
Examples
Add a Fibre Channel server port/HBA with the –manual ag set:
server addhba -name 'server 1' -manual -porttype FibreChannel -WWN 210200E08B309080
Add a server port/HBA using an iSCSI name:
server addhba -name 'server 1' -WWN iqn.2002-03.com.compellent:MNEP-1234-Lab01
server addtocluster
Description
On Storage Center 5.0 and higher, assigns an existing physical or virtual server to an existing server cluster.
The command is rejected if:
• Server or cluster identier is omitted.
• Requested server is not a physical or virtual server.
• Requested server or cluster is not found in the Storage Center.
• Requested server is not a physical or virtual server.
• Requested parent is not a cluster.
• Requested server already belongs to a cluster.
• Server operating system does not match the cluster operating system.
Command Reference
49