Reference Guide

storagetype show
Description
Shows information about a storage type. Output depends on the lter options specied in the command.
Format
storagetype show {options}
Options
–csv filename
Species a csv le in which to save output.
–diskfolder string
Species the disk folder associated with a storage type by which to lter the display.
–h
Shows help for command options.
–index string
Species the index of a storage type by which to lter the display.
–name string
Species the name of a storage type by which to lter the display.
–pagesize string
Species the page size of the storage type by which to lter the display.
–pagesizeblocks string
Species the page size in blocks of the storage type by which to lter the display.
–redundancy string
Species storage type redundancy by which to lter the display. Allowed values are:
• 0: Non-Redundant
• 1: Redundant
• 2: Dual-Redundant
The default is 1 (Redundant). If you specify a storage type that has not been primed on the Storage Center, the command terminates
without creating the volume. For information on storage types, see the Dell Storage Manager Administrator’s Guide.
–spaceallocated string
Species the space allocated by the storage type by which to lter the display.
–spaceallocatedblocks string
66
Command Reference