Administrator Guide
d) Type the gateway address of the management network in the Gateway IPv4 Address field.
e) Type the domain name of the management network in the Domain Name field.
f) Type the DNS server addresses of the management network in the DNS Server and Secondary DNS Server fields.
4. Click Next.
Submit the Storage Center License
Use the Submit Storage Center License page to type the name and title of the approving customer and to select the Storage Center
license file.
Steps
1. Click Browse.
The Select License File window opens.
2. Browse to the location of the license file, select the file, and then click Select.
3. Verify the approving customer information and license file path, then click Next.
The Create Disk Folder page opens.
Create a Disk Folder
Create a disk folder to manage unassigned disks.
Steps
1. Type a name for the disk folder.
2. (Optional) To create a secure disk folder, select the Create as a Secure Data Folder checkbox.
NOTE: This option is available only if all drives support Secure Data.
3. Click Change to open a dialog box for selecting the disks to assign to the folder.
4. Click Next.
The Create Storage Type page opens.
5. Select the redundancy level from the drop-down menu for each disk tier.
6. (Optional) Select the datapage size from the Datapage Size drop-down menu.
7. Click Next.
The Add Controller page opens.
Deploy the Storage Center – Add a Controller
In a dual-controller storage system, the wizard prompts you to add the second controller.
Steps
1. Select Add Second Controller.
2. Type a serial number for the second controller.
3. Type the IPv4 address and eth1 IPv4 address of the second controller.
4. If the first controller has an IPv6 address set and the Storage Center supports IPv6, type the IPv6 address and IPv6 subnet prefix of
the second controller.
5. Click Next. The Set System Information page opens.
Deploy the Storage Center
The Storage Center sets up the controller using the information provided on the previous pages.
Steps
1. The Storage Center performs system setup tasks. The Deploy Storage Center page displays the status of these tasks.
To learn more about the initialization process, click More information about Initialization.
Storage Center Deployment
83