Install Guide

b. To change the port number of the service, type a different port number in the Port field.
c. To enable or disable the service, select or clear the Enabled check box.
d. Click OK.
8. Click Next.
The Summary page is displayed.
9. Verify the information on the Summary page.
10. Click Finish.
A confirmation dialog box is displayed.
11. Click Yes.
The Data Collector restarts, and the login page for Unisphere Central is displayed.
12. When the migration is complete, stop the Storage Manager Data Collector service on the Windows server.
Next Steps After Migration
Depending on the configuration of the existing Data Collector, you may need to perform some additional setup tasks.
● Configure Active Directory
● Import new SSL certificates or generate new SSL certificates using the new IP address or fully qualified domain name
(FQDN) of the Data Collector.
To generate new SSL certificates:
1. Go to Data Collector > General > Security and click Generate Certificate.
The Generate Certificate dialog box is displayed.
2. Select the type of certificate to generate from the Certificate type drop-down menu.
The options are:
○ All certificates - Generates Data Collector and VASA Provider certificates.
○ DSM Server - Generates Data Collector certificates.
○ VASA Server - Generates VASA Provider certificates.
3. Select the new IP address or FQDN of the Data Collector from the Certificate Subject drop-down menu.
4. If you are regenerating a VASA Provider certificate, type the username and password of a Data Collector user with
Administrator privileges in the DSM User Name and Password fields.
5. Click OK.
The Data Collector is restarted new certificates are generated with new IP address or FQDN of the Data Collector.
24
Deploying and Configuring the Storage Manager Virtual Appliance