Install Guide
Table Of Contents
- About This Guide
- Storage Manager 2018 R1 Installation Guide
- Contents
- Introduction to Storage Manager
- Planning and Preparation
- Installing and Configuring the Data Collector
- Installing and Configuring the Storage Manager Virtual Appliance
- Installing and Configuring the Storage Manager Client
- Updating Storage Manager Software
IPv6 Support
The Storage Manager Data Collector can use IPv6 to accept connections from Storage Manager Client and to communicate
with managed Storage Center SANs.
To use IPv6, assign IPv6 addresses as described in the following table.
IPv6 Connection Requirements
Storage Manager Client to Data Collector
● Storage Manager Client computer must have an IPv6
address.
● Data Collector server must have both an IPv4 address and
an IPv6 address.
Data Collector to Storage Center
● Data Collector server must have both an IPv4 address and
an IPv6 address.
● Storage Center SAN must have both an IPv4 address and
an IPv6 address on the management interface.
14 Introduction to Storage Manager