Administrator Guide
Table Of Contents
- 关于本指南
- Unisphere 和 Unisphere Central 2020 R1 管理员指南
- Unisphere 概览
- 使用入门
- Storage Center 概览
- Storage Center 部署
- Storage Center 管理
- Storage Center 服务器管理
- Storage Center 维护
- 管理 Storage Center 设置
- 配置 Storage Center 以继承设置
- 管理 Storage Center 用户和组
- 用户权限级别
- 用户组
- 用户帐户管理和验证
- 管理本地 Storage Center 用户
- 创建本地 Storage Center 用户
- 配置新 Storage Center 用户的默认用户首选项
- 增加本地 Storage Center 用户的权限级别
- 更改本地 Storage Center 用户的会话超时
- 更改 Storage Center 用户的首选语言
- 启用或禁用本地 Storage Center 用户的访问
- 修改本地 Storage Center 用户的本地组成员资格
- 配置本地 Storage Center 用户的首选项
- 修改关于本地 Storage Center 用户的描述性信息
- 更改本地 Storage Center 用户密码
- 删除本地 Storage Center 用户
- 还原删除的本地 Storage Center 用户
- 管理本地 Storage Center 用户组
- 管理本地 Storage Center 用户密码要求
- 启用目录服务验证
- 管理目录服务用户
- 管理目录用户组
- 管理前端 I/O 端口
- 管理后端 I/O 端口硬件
- 使用容错域对 Fibre Channel I/O 端口分组
- 使用容错域对 iSCSI I/O 端口分组
- 使用容错域对 SAS I/O 端口分组
- 管理磁盘和磁盘文件夹
- 管理安全数据
- 管理数据冗余
- 管理磁盘机柜
- 管理 Storage Center 控制器
- 更新 Storage Center
- 关闭和重新启动 Storage Center
- 管理现场可更换单元 (FRU)
- 远程 Storage Center 和复制 带宽控制
- Storage Center 复制和 Live Volume
- Storage Center 复制
- Storage Center Live Volume
- Live Volume 要求
- Live Volume 类型
- Live Volume 角色
- Live Volume 自动故障转移
- Live Volume 的受管复制
- 创建 Live Volume
- 修改 Live Volume
- 交换 Live Volume 的主要 Storage Center
- 取消 Storage Center 角色交换
- 更改 Live Volume 的传输类型
- 更改同步 Live Volume 的同步模式
- 向 Live Volume 添加受管复制
- 包含活动快照数据
- 为 Live Volume 启用或禁用重复数据消除
- 更改 Live Volume 的带宽控制
- 配置 Live Volume 以将数据写入到目标的最低层
- 允许将存储复制到最低层选择
- 允许 Live Volume 自动交换角色
- 将 Live Volume 还原为复制
- 暂停 Live Volume
- 恢复已暂停的 Live Volume
- 为 Live Volume 设置阈值警报定义
- 删除 Live Volume
- 手动使主要 Live Volume 联机
- 强制删除 Live Volume
- 使用自动故障转移修改 Live Volume
- Live Volume ALUA
- 监测 Live Volume
- Storage Center DR 准备和激活
- 查看 Storage Center 信息
- Storage Center 监测
- Storage Center 报告
- Data Collector 管理
- Data Collector 用户管理
- SupportAssist 管理
将 UPS 添加到 Storage Center 中
不间断电源设备 (UPS) 为 Storage Center 提供电源冗余。当 UPS 添加至 Storage Center 时,Unisphere 中会显示 UPS 的状态。
步骤
1. 如果您已连接到 Data Collector,请从 Unisphere Central 的左侧导航窗格中的下拉列表选择一个 Storage Center。
2. 从 系统菜单中,单击硬件。
此时会显示硬件视图。
3. 单击系统选项卡。
4. 在系统选项卡导航窗格中,单击 UPS。
此时会显示 UPS 视图。
5. 单击 (新建)。
此时,注册 UPS 对话框会打开。
6. 在团体字符串字段中,键入 UPS 上配置的团体字符串。默认为“公共”。
7. 在 IPv4 地址字段中,键入 UPS 的 IP 地址。
8. 在类型字段中,选择 UPS 品牌。
9. 单击确定。
更新 Storage Center
通过直接连接到 Storage Center 或者通过 Data Collector 进行连接,从而将 Storage Center 更新至最新版本。如果要更新的 Storage
Center 未启用 SupportAssist,您可以使用 Storage Center Update Utility 更新软件。有关 Storage Center Update Utility 的更多信息,
请参阅
使用
Storage Center Update Utility。
注: 从 Storage Center 版本 6.6 更新到更高版本是一个单独的指导式过程。有关更多信息,请参阅 Storage Center OS Version 7
Software Update Guide(Storage Center 操作系统版本 7 软件更新指南)。
更新 Storage Center 软件
如果在 Storage Center 上启用了 SupportAssist,请遵循此步骤。
前提条件
SupportAssist 必须在 Storage Center 上启用。
关于此任务
在 Storage Center 软件更新对话框中显示的选项取决于在 Storage Center 上执行的更新类型。
步骤
1. 如果您已连接到 Data Collector,请从 Unisphere Central 的左侧导航窗格中的下拉列表选择一个 Storage Center。
2. 单击
摘要。
此时会显示摘要视图。
3. 单击 (更多操作)并选择检查更新。
此时,更新 Storage Center 对话框会打开并检查更新。
4. (可选)单击发行说明,了解与更新有关的信息。
5. (可选,Storage Center 版本 7.4.2 及更高版本)。单击运行运行状况检查,以验证 Storage Center 在更新软件之前是否处于最佳
运行状态。
结果在运行状况检查完成后显示。请修复发现的任何错误,然后再更新 Storage Center 软件。
6. 选择更新操作:
● 选择下载更新,然后单击下载更新以立即下载更新。
● 选择立即下载并安装以立即下载并应用更新。
7. 选择安装类型:
● 要仅应用不影响服务的更新,请选择应用不影响服务的更新。
Storage Center 维护 191