Administrator Guide
Table Of Contents
- 关于本指南
- Unisphere 和 Unisphere Central 2020 R1 管理员指南
- Unisphere 概览
- 使用入门
- Storage Center 概览
- Storage Center 部署
- Storage Center 管理
- Storage Center 服务器管理
- Storage Center 维护
- 管理 Storage Center 设置
- 配置 Storage Center 以继承设置
- 管理 Storage Center 用户和组
- 用户权限级别
- 用户组
- 用户帐户管理和验证
- 管理本地 Storage Center 用户
- 创建本地 Storage Center 用户
- 配置新 Storage Center 用户的默认用户首选项
- 增加本地 Storage Center 用户的权限级别
- 更改本地 Storage Center 用户的会话超时
- 更改 Storage Center 用户的首选语言
- 启用或禁用本地 Storage Center 用户的访问
- 修改本地 Storage Center 用户的本地组成员资格
- 配置本地 Storage Center 用户的首选项
- 修改关于本地 Storage Center 用户的描述性信息
- 更改本地 Storage Center 用户密码
- 删除本地 Storage Center 用户
- 还原删除的本地 Storage Center 用户
- 管理本地 Storage Center 用户组
- 管理本地 Storage Center 用户密码要求
- 启用目录服务验证
- 管理目录服务用户
- 管理目录用户组
- 管理前端 I/O 端口
- 管理后端 I/O 端口硬件
- 使用容错域对 Fibre Channel I/O 端口分组
- 使用容错域对 iSCSI I/O 端口分组
- 使用容错域对 SAS I/O 端口分组
- 管理磁盘和磁盘文件夹
- 管理安全数据
- 管理数据冗余
- 管理磁盘机柜
- 管理 Storage Center 控制器
- 更新 Storage Center
- 关闭和重新启动 Storage Center
- 管理现场可更换单元 (FRU)
- 远程 Storage Center 和复制 带宽控制
- Storage Center 复制和 Live Volume
- Storage Center 复制
- Storage Center Live Volume
- Live Volume 要求
- Live Volume 类型
- Live Volume 角色
- Live Volume 自动故障转移
- Live Volume 的受管复制
- 创建 Live Volume
- 修改 Live Volume
- 交换 Live Volume 的主要 Storage Center
- 取消 Storage Center 角色交换
- 更改 Live Volume 的传输类型
- 更改同步 Live Volume 的同步模式
- 向 Live Volume 添加受管复制
- 包含活动快照数据
- 为 Live Volume 启用或禁用重复数据消除
- 更改 Live Volume 的带宽控制
- 配置 Live Volume 以将数据写入到目标的最低层
- 允许将存储复制到最低层选择
- 允许 Live Volume 自动交换角色
- 将 Live Volume 还原为复制
- 暂停 Live Volume
- 恢复已暂停的 Live Volume
- 为 Live Volume 设置阈值警报定义
- 删除 Live Volume
- 手动使主要 Live Volume 联机
- 强制删除 Live Volume
- 使用自动故障转移修改 Live Volume
- Live Volume ALUA
- 监测 Live Volume
- Storage Center DR 准备和激活
- 查看 Storage Center 信息
- Storage Center 监测
- Storage Center 报告
- Data Collector 管理
- Data Collector 用户管理
- SupportAssist 管理
图 15: 第四步
Live Volume 的受管复制
使用受管复制可将主要 Live Volume 复制到第三个 Storage Center,以防主要和次要 Storage Center 所在的站点停机时,保护数据不
会丢失。当 Live Volume 交换角色发生时,受管复制将主卷复制到另一个 Storage Center。
支持的带受管复制的 Live Volume 拓扑
支持三种特定的 Live Volume 类型和受管复制类型的组合。下表列出了受支持的组合。
Live Volume 类型
受管复制类型
异步 同步
异步 异步
同步 异步
带受管复制的 Live Volume 配置示例
以下示例显示了受管复制在 Live Volume 交换角色之前和之后的行为方式。
● Live Volume 行为:当靠近主要 Storage Center 的服务器发送修改主要卷的 IO 请求时,对主要 Live Volume 所做的更改通过 Fibre
Channel 或 iSCSI 复制到次要 Storage Center。当靠近次要 Storage Center 的服务器向次要 Live Volume 发送 IO 请求时,次要
Storage Center 将 IO 请求转发至位于主要 Storage Center 上的主要卷。对主要卷所做的这些更改最终被复制到次要卷。
● 受管复制行为:对主要 Live Volume 所做的更改通过 Fibre Channel 或 iSCSI 复制到第三 Storage Center。当 Live Volume 交换角色
时,受管复制跟随主要卷移至另一个 Storage Center。
216 Storage Center 复制和 Live Volume