Administrator Guide

• DHCP - Dynamic IP address
• Static - Static IP address
9 If the network conguration is set to Static:
a Type the IP address of one or more Domain Name System (DNS) servers in the DNS eld.
NOTE: Separate multiple IP addresses using commas.
b To congure IPv4 network settings, select the IPv4 radio button, and type the IP Address, netmask, and gateway in the
associated elds.
To congure IPv6 network settings, select the IPv6 radio button, and type the IP Address, gateway, and prex length in the
associated elds.
10 Click OK.
Congure Time Settings for a Virtual Appliance
Congure the time settings to set the time zone and specify how to synchronize the time on the Virtual Appliance. It is recommended to
set the time zone to the local time zone in which the Virtual Appliance is located.
1 If a Storage Center is selected from the drop-down list, click (Home) in the left navigation pane.
2 Click Data Collector.
The Data Collector view is displayed.
3 Click the Virtual Appliance tab, and then click the Time subtab.
4 Click Edit. The Time Conguration dialog box opens.
5 Select a time zone for the Virtual Appliance from the Timezone drop-down menu.
6 To sync the time on the Virtual Appliance with Network Time Protocol (NTP) servers, select Sync with NTP Servers
(recommended) and type the name of one or more NTP servers in the NTP Servers eld.
7 To sync the time on the Virtual Appliance with the ESX host select Sync with ESX Host.
8 Click OK.
Managing Available Storage Centers
Use the Data Collector Users & System tab to manage available Storage Centers that have been mapped to one or more Unisphere
Central users.
Delete an Available Storage Center
Remove a Storage Center when you no longer want to manage it from the Data Collector. If a Storage Center is removed from all Data
Collector
user accounts, historical data for the Storage Center is also removed.
1
If a Storage Center is selected from the drop-down list, click (Home) in the left navigation pane.
2 Click Data Collector.
The Data Collector view is displayed.
3 Click the Users & System tab, and then select the Storage Centers subtab.
4 Select the Storage Center to delete.
5 Click Delete Storage Center.
A warning message is displayed.
6 Click Yes.
Data Collector Management
213