Administrator Guide

2. Click Summary.
The Summary view is displayed.
3. Click (Settings).
The Storage Center Settings dialog box opens.
4. Click the Secure Console tab.
5. Select the Enable secure console access checkbox.
6. In the Reservation Server Host or IP Address, type the host name or IP address of a secure console server provided by technical
support.
7. In the Session Time to Live field, type the number of minutes, hours, or days to keep the session active.
NOTE: The maximum time to live is 72 hours.
8. If a SOCKS proxy is required to allow the Storage Center to communicate with the secure console server specified in the previous
step, configure the Proxy Settings.
a) From the Proxy Type drop-down menu, select SOCKS4 or SOCKS5.
b) In the IP Address field, type the IP address of the proxy server.
c) In the Port field, type the port used by the proxy server.
d) If the proxy server requires authentication, complete the User Name and Password fields.
9. Click OK.
Restart the Storage Center Secure Console Server
Troubleshooting an issue may require restarting the secure console server.
Steps
1. If you are connected to a Data Collector, select a Storage Center from the drop-down list in the left navigation pane of Unisphere
Central.
2. Click
Summary.
The Summary view is displayed.
3. Click (Settings).
The Storage Center Settings dialog box opens.
4. Click the Secure Console tab.
5. Click Restart Server.
A confirmation dialog box opens.
6. Click OK to confirm.
7. Click OK.
Configuring a Storage Center to Inherit Settings
A Storage Center can be configured to inherit settings from another Storage Center to save time and ensure that Storage Centers are
configured consistently.
About this task
NOTE: This function applies to Unisphere Central connected to a Data Collector only.
NOTE: For user interface reference information, click Help
Steps
1. Select a Storage Center from the drop-down list in the left navigation pane.
2. Click Summary.
The Summary view is displayed.
3. Click (More Actions) and select Inherit Settings from the drop-down menu.
The Inherit Settings dialog box opens.
4. Select the Storage Center from which you want to inherit settings, then select the checkbox for each category of settings that you
want to inherit.
104
Storage Center Maintenance