Manualshelf

Administrator Guide

ManualsBrandsDell ManualsCompellent (SCStorage SCv3000
151152153154155156157158159160
Unmute an Enclosure Alarm
Unmute an enclosure alarm to allow it to sound.
Steps
1. If you are connected to a Data Collector, select a Storage Center from the drop-down list in the left navigation pane of Unisphere
Central.
2. From the
SYSTEM menu, click Hardware.
The Hardware view is displayed.
3. Click the System tab.
4. In the System tab navigation pane, click Enclosure.
The Enclosure view is displayed.
5. In the right pane, select an enclosure.
6. Click Audible Alarms, then select Request Mute Off.
Clear the Swap Status for an Enclosure Cooling Fan
Clear the swap status for an enclosure cooling fan to acknowledge that it has been replaced.
Steps
1. If you are connected to a Data Collector, select a Storage Center from the drop-down list in the left navigation pane of Unisphere
Central.
2. From the SYSTEM menu, click Hardware.
The Hardware view is displayed.
3. Click the System tab.
4. In the System tab navigation pane, click Fan Sensors.
The Fan Sensors view is displayed.
5. In the right pane, select the cooling fan, then click Request Swap Clear.
Clear the Swap Status for an Enclosure I/O Module
Clear the swap status for an enclosure I/O module to acknowledge that it has been replaced.
Steps
1. If you are connected to a Data Collector, select a Storage Center from the drop-down list in the left navigation pane of Unisphere
Central.
2. From the
SYSTEM menu, click Hardware.
The Hardware view is displayed.
3. Click the System tab.
4. In the System tab navigation pane, click I/O Modules.
The I/O Modules view is displayed.
5. In the right pane, select the I/O module, then click Request Swap Clear.
Clear the Swap Status for an Enclosure Power Supply
Clear the swap status for an enclosure power supply to acknowledge that it has been replaced.
Steps
1. If you are connected to a Data Collector, select a Storage Center from the drop-down list in the left navigation pane of Unisphere
Central.
2. From the
SYSTEM menu, click Hardware.
The Hardware view is displayed.
3. Click the System tab.
158
Storage Center Maintenance