Administrator Guide

12. To change the period of time that Unisphere Central monitors the threshold definition
• Select or clear the Time Constraint check box to enable or disable the time constraint.
• If the Time Constraint check box is selected, specify the start of the time period in the Start Time field and specify the end of
the time period in the End Time field.
13. Click Next.
The Summary page is displayed.
14. Click Finish.
Delete a Threshold Definition
If you no longer need a threshold definition, you can delete it.
Steps
1. If a Storage Center is selected from the drop-down list in Unisphere Central, click
(Home).
The Unisphere Central Home page is displayed.
2.
From the
MONITORING menu, click Thresholds.
The Thresholds view is displayed.
3. Click the Definitions tab.
4. Select the threshold definition to remove and click
(Delete).
The Delete Threshold Alert Definitions dialog box opens.
5. Click OK.
Delete Multiple Threshold Definitions
If you no longer need multiple threshold definitions, you can delete them.
Steps
1.
If you are connected to a Data Collector and a Storage Center is selected from the drop-down list in Unisphere Central, click
(Home).
The Unisphere Central Home page is displayed.
2. From the MONITORING menu, click Thresholds.
The Thresholds view is displayed.
3. Click the Definitions tab.
4. Use Shift+click or Control+click to select the threshold definitions to remove.
5. Click (Delete).
The Delete Threshold Alert Definitions dialog box opens.
6. Click OK.
Assigning Storage Objects to Threshold Definitions
You can add or remove the storage objects that are monitored by threshold definitions.
Assign Storage Objects to a Threshold Definition
Add storage objects to a threshold definition to monitor the storage objects.
About this task
Storage objects cannot be added to a threshold definition that has the All Objects checkbox selected.
Steps
1.
If a Storage Center is selected from the drop-down list in Unisphere Central, click
(Home).
The Unisphere Central Home page is displayed.
2. From the MONITORING menu, click Thresholds.
The Thresholds view is displayed.
Storage Center Monitoring
187