Administrator Guide

3. Click the Definitions tab.
4. Select the threshold definition to which to assign storage objects.
5. Click Add Objects.
The Add Objects wizard is opens.
6. Select the storage objects to assign to the threshold definition.
7. Click Next.
The Summary page is displayed.
8. Click Finish.
Unassign Storage Objects from a Threshold Definition
Remove storage objects from a threshold definition to stop monitoring the storage objects.
About this task
Storage objects cannot be removed from a threshold definition that has the All Objects check box selected.
Steps
1. If a Storage Center is selected from the drop-down list in Unisphere Central, click
(Home).
The Unisphere Central Home page is displayed.
2. From the
MONITORING menu, click Thresholds.
The Thresholds view is displayed.
3. Click the Definitions tab.
4. Select the threshold definition from which you want to remove storage objects.
5. Click Remove Objects.
The Remove Objects dialog box opens.
6. Select check boxes of the storage objects to remove from the threshold definition.
7. Click OK.
Assigning Threshold Definitions to Storage Objects
You can assign threshold definitions to storage objects that are accessible from the STORAGE menu in Unisphere Central.
View the Threshold Definitions Assigned to a Storage Object or Storage Center
View the threshold definitions assigned to a storage object or Storage Center in the Threshold Alerts tab.
Steps
1. If you are connected to a Data Collector, select a Storage Center from the drop-down list in the left navigation pane of Unisphere
Central.
2.
To display the threshold definitions assigned to a storage object, select one of the following storage objects from the
STORAGE
menu:
• Volumes – Click the Volumes view, click on the name of a volume, and click the Thresholds tab.
• Servers – Click the Servers view, click on the name of a server, and click the Thresholds tab.
• Profiles – Click the Profiles view, click the name of a storage profile, and click the Thresholds tab.
• Disks – Click the Disks view, click on the name of a disk, and click the Thresholds tab.
3. To display the threshold definitions assigned to the Storage Center, select Thresholds from the MONITORING menu.
Assign a Threshold Definition to a Controller
Select a controller and then click the Set Threshold Alert Definitions to assign a threshold definition.
Steps
1. If you are connected to a Data Collector, select a Storage Center from the drop-down list in the left navigation pane of Unisphere
Central.
2. From the
SYSTEM menu, click Hardware.
188
Storage Center Monitoring