Administrator Guide

Delete Historical Threshold Alerts
If a historical alert is no longer needed, you can delete it.
Steps
1. If a Storage Center is selected from the drop-down list in Unisphere Central, click
(Home).
The Unisphere Central Home page is displayed.
2. From the MONITORING menu, click Thresholds.
The Thresholds view is displayed.
3. Click the Alerts tab.
4. Click
(Delete).
The Delete Alerts dialog box opens.
5. Click OK.
Configuring Email Notifications for Threshold Alerts
Unisphere Central can be configured to send email notification when a threshold alert is exceeded.
To receive email notifications for threshold alerts:
1. Configure the SMTP server settings on the Data Collector.
2. Add an email address to your user account.
3. Configure your user account settings to send an email notification when a threshold alert is exceeded.
NOTE:
Unisphere Central can send only one threshold alert email for every 24 hour period. The number of threshold
alert emails per 24 hour period cannot be configured.
Configure SMTP Server Settings
The SMTP server settings must be configured to allow Unisphere Central to send notification emails.
Steps
1.
If a Storage Center is selected from the drop-down list in Unisphere Central, click (Home).
The Unisphere Central Home page is displayed.
2. Click Data Collector.
The Data Collector view is displayed.
3. Click the Environment tab and, then click the SMTP Server subtab.
4. Click Edit.
The SMTP Server Configuration dialog box opens.
5. Configure the SMTP server settings by performing the following steps:
a) In the From Email Address field, type the email address to display as the sender of emails from the Data Collector.
b) In the Host or IP Address field, type the host name or IP address of the SMTP server.
c) If the port number of the SMTP server is not 25, type the correct port number in the Port field.
d) If the SMTP server requires authentication, select the Authentication checkbox, then type the user name and password in the
SMTP User Name and SMTP User Password fields.
6. Click OK.
Configure an Email Address for Your User Account
To receive email notifications, you must specify an email address for your user account.
Prerequisites
The SMTP server settings must be configured for the Data Collector. If these settings are not configured, the Data Collector is not able to
send emails.
Storage Center Monitoring
191