Administrator Guide

4. Click Edit.
The Automated Reports Settings dialog box opens.
5. Select the checkboxes in the Automated Report Settings area to specify which reports to generate and how often to generate
them.
6. Select the checkboxes in the Automated Table Report Settings area to specify which reports to generate and how often to
generate them.
NOTE: Automated table reports can be saved in a public directory or attached to automated emails, but they do not
appear in the Historical Reports view.
7. Set the Automated Report Options
a) To export the reports to a public directory, select the Store report in public directory checkbox and enter the full path to the
directory in the Directory field.
NOTE: The directory must be located on the same server as the Data Collector.
NOTE: Automated reports cannot be saved to a public directory when using a Virtual Appliance.
b) To email the reports selected in the Automated Reports Settings area, select the Attach Automated Reports to email
checkbox.
c) To email the reports selected in the Automated Table Reports Settings area, select the Attach Table Reports to email
checkbox.
d) Select the file format for exported and emailed Table Reports from the File Type for Table Reports drop-down menu.
8. Click OK.
Configure Unisphere Central to Email Reports
Unisphere Central can be configured to send automated reports by email.
About this task
To send automated reports by email:
Steps
1. Configure the SMTP server settings for the Data Collector.
2. Add an email address to your user account.
3. Configure email notification settings for your user account.
Configure SMTP Server Settings
The SMTP server settings must be configured to allow Unisphere Central to send notification emails.
Steps
1.
If a Storage Center is selected from the drop-down list in Unisphere Central, click
(Home).
The Unisphere Central Home page is displayed.
2. Click
Data Collector.
The Data Collector view is displayed.
3. Click the Environment tab and, then click the SMTP Server subtab.
4. Click Edit.
The SMTP Server Configuration dialog box opens.
5. Configure the SMTP server settings by performing the following steps:
a) In the From Email Address field, type the email address to display as the sender of emails from the Data Collector.
b) In the Host or IP Address field, type the host name or IP address of the SMTP server.
c) If the port number of the SMTP server is not 25, type the correct port number in the Port field.
d) If the SMTP server requires authentication, select the Authentication checkbox, then type the user name and password in the
SMTP User Name and SMTP User Password fields.
6. Click OK.
Storage Center Reports
201