Administrator Guide

View Remote Data Collector Settings
If a Remote Data Collector has been configured, use Unisphere Central to view the settings and status.
Prerequisites
Remote Data Collector has been configured for the system.
Steps
1. If a Storage Center is selected from the drop-down list in Unisphere Central, click (Home).
The Unisphere Central Home page is displayed.
2.
Click Data Collector.
The Data Collector view is displayed.
3. Click the Environment tab, and then click the Remote Data Collector subtab.
The settings and status of the Remote Data Collector are displayed.
Access the Remote Data Collector
If a Remote Data Collector has been configured, use Unisphere Central to access the Remote Data Collector.
Prerequisites
Remote Data Collector has been configured for the system.
Steps
1.
If a Storage Center is selected from the drop-down list in Unisphere Central, click (Home).
The Unisphere Central Home page is displayed.
2. Click Data Collector.
The Data Collector view is displayed.
3. Click the Environment tab, and then click the Remote Data Collector subtab.
The settings and status of the Remote Data Collector are displayed.
4. Click the url in the RDC URL field.
The Unisphere Central login page for the Remote Data Collector is displayed.
Configure SMTP Server Settings
The SMTP server settings must be configured to allow Unisphere Central to send notification emails.
Steps
1.
If a Storage Center is selected from the drop-down list in Unisphere Central, click
(Home).
The Unisphere Central Home page is displayed.
2. Click
Data Collector.
The Data Collector view is displayed.
3. Click the Environment tab and, then click the SMTP Server subtab.
4. Click Edit.
The SMTP Server Configuration dialog box opens.
5. Configure the SMTP server settings by performing the following steps:
a) In the From Email Address field, type the email address to display as the sender of emails from the Data Collector.
b) In the Host or IP Address field, type the host name or IP address of the SMTP server.
c) If the port number of the SMTP server is not 25, type the correct port number in the Port field.
d) If the SMTP server requires authentication, select the Authentication checkbox, then type the user name and password in the
SMTP User Name and SMTP User Password fields.
6. Click OK.
Data Collector Management
209