Administrator Guide

Reset Password Aging Clock
The password aging clock determines when a password expires based on the minimum and maximum age requirements. Reset the
password aging clock to start the password aging clock from the current date and time.
Prerequisites
Password Configuration must be enabled.
Steps
1. If a Storage Center is selected from the drop-down list in Unisphere Central, click
(Home).
The Unisphere Central Home page is displayed.
2.
Click Data Collector.
The Data Collector view is displayed.
3. Click the Users & System tab, then select the Password Configuration subtab.
4. Click Edit. The Password Configuration dialog box opens.
5. Select the Reset Aging Clock checkbox.
6. Click OK.
Related reference
Configure Local Unisphere Central User Password Requirements
Require Users to Change Passwords
The new password requirements apply to new user passwords only. Existing user passwords may not follow the password requirements.
Require users to change passwords at next login so that the password complies with the password requirements.
Prerequisites
Password Configuration must be enabled.
Steps
1.
If a Storage Center is selected from the drop-down list in Unisphere Central, click
(Home).
The Unisphere Central Home page is displayed.
2. Click Data Collector.
The Data Collector view is displayed.
3. Click the Users & System tab, then select the Password Configuration subtab.
4. Click Edit. The Password Configuration dialog box opens.
5. Select the Requires Password Change checkbox.
6. Click OK.
Related reference
Configure Local Unisphere Central User Password Requirements
Data Collector User Management
233