Administrator Guide

Add a Managed Replication to a Live Volume
Add a managed replication to a Live Volume to replicate the primary volume to a third Storage Center.
Prerequisites
The primary, secondary, and managed replication destination Storage Centers must meet the managed replication requirements.
Steps
1. Click the
HOME menu.
The Unisphere Central Home page is displayed.
If a Storage Center is selected from the drop-down list in Unisphere Central, click (Home).
2. From the Data Mobility menu, click Replications & Live Volumes.
3. Select the Live Volumes tab.
4. Select the Live Volume to edit.
5. Click
(More Actions) and select Add Managed Replication.
The New Managed Replication wizard opens.
6. On the Select Target Storage Center page, select the Storage Center on which you want to add the Managed Replication
and click Next.
7. On the Select Target Volume page, set the volume attributes as needed. For information about the settings click Help.
8. On the Settings page, select the transport and transfer attributes and the replication attributes and click Next. For
information about the settings click Help.
9. On the Summary page, review the Managed Replication settings.
● Click Finish to create the replication and close the wizard.
● Click Back to change your settings.
Include Active Snapshot Data
The Active Snapshot represents the current, unfrozen volume data.
Prerequisites
The Live Volume transfer type must be asynchronous.
Steps
1.
Click the
HOME menu.
The Unisphere Central Home page is displayed.
If a Storage Center is selected from the drop-down list in Unisphere Central, click (Home).
2. From the Data Mobility menu, click Replications & Live Volumes.
3. Select the Live Volumes tab.
4. Select the Live Volume to edit and click (Edit).
The Edit Live Volume dialog box opens.
5. In the Replication Attributes area, select Replicate Active Snapshot.
6. Click OK.
Storage Center Replications and Live Volumes
237