Administrator Guide

2. Click Data Collector.
The Data Collector view is displayed.
3. Click the Monitoring tab, and then click the Automated Reports subtab.
4. Review the current report settings:
● If the settings are acceptable, click Generate.
● To change the report settings, click Edit, adjust the settings, and click Generate.
The Generate Reports Now dialog box opens.
5. Select the checkboxes of the reports to generate.
6. Click OK. The reports are generated and the Generate Reports dialog box closes.
NOTE: Generating a report overwrites previously generated reports in the folder for that day. To prevent these reports
from being overwritten, specify a different directory in the Automated Report Options area of the Automated
Reports dialog box.
7. Click OK.
Configure Data Collection Schedules
Configure the interval at which the Data Collector collects monitoring data from Storage Centers.
Steps
1.
If a Storage Center is selected from the drop-down list in Unisphere Central, click (Home).
The Unisphere Central Home page is displayed.
2. Click Data Collector.
The Data Collector view is displayed.
3. Click the Monitoring tab, and then click the Data Collection subtab.
4. Click Edit.
The Data Collection dialog box opens.
5. Configure the data collection schedules by performing the following steps:
a. To change how often I/O usage data is collected, select a period of time from the IO Usage drop-down menu.
b. To change how often replication usage data is collected, select a period of time from the Replication Usage drop-down
menu.
c. To change how often storage usage data is collected, select a period of time from the Storage Usage drop-down menu.
If Daily is selected from the Storage Usage drop-down menu, the time of the day that storage usage data is collected
can be selected from the Storage Usage Time drop-down menu.
d. To change the number of days after which a log is expired, set the number of days in the Alert Lifetime field.
e. To change the number of days after which reporting data is expired, set the number of days in the Reporting Data
Lifetime field.
6. Click OK.
Enable Debug Logs
Enable debug logs to gather additional information for troubleshooting purposes. Do not set debug log options unless instructed
to do so by technical support.
Steps
1.
If a Storage Center is selected from the drop-down list in Unisphere Central, click
(Home).
The Unisphere Central Home page is displayed.
2. Click
Data Collector.
The Data Collector view is displayed.
3. Click the Monitoring tab, and then click the Support subtab.
310
Data Collector Management