Release Notes

Known Issues Related to Storage Management

The following known issues are related to storage management:

Table 29. Known Storage Management Issues in Storage Manager 2019 R1

Issue Description

DSM-38054 Storage Manager does not display all the IPv4 addresses for a host using an iSCSI software initiator.

Workaround: None

DSM-30033 Creating a server using the Create Server from VMware vSphere or vCenter wizard fails if the host

contains adapters that are not VMware software iSCSI adapters.

Workaround: Create the server manually using the Create Server dialog box.

DSM-28354 Storage Manager might not display information for some Hyper-V virtual machine volumes that are

monitored with the Server Agent in the Servers view.

Workaround: View information for those volumes in the Storage view.

DSM-28297 Discover and Configure Storage Centers wizard displays an incorrect size for disks on a discovered

Storage Center.

Workaround: None

DSM-28295 After reinstalling the Server Agent, it might fail to register the server with Storage Manager.

Workaround: Register the server in the Storage Manager Client.

DSM-20038 During initial setup of Storage Center, the Discover and Configure Storage Centers wizard might close

while updating the Storage Center. You cannot open the Discover and Configure Storage Centers

wizard to complete the setup until the controllers finish restarting.

Workaround: Wait for the controllers to power on, reconnect to the Storage Center, and then launch

the Discover and Configure Uninitialized Storage Centers wizard.

DSM-13200 Storage Manager does not delete a Snapshot Profile until a refresh if the Snapshot Profile was

deleted without the recycle bin and was assigned to a volume.

Workaround: Refresh the Storage Manager Client.

DSM-11762 When creating a volume using the Server Agent, Storage Manager might show a warning that the

label contains illegal characters if another volume on the Storage Center contains unsupported

characters.

Workaround: Correct the label of the volume with unsupported characters.

DSM-9428 Creating a server cluster using the Create Server from vSphere or vCenter wizard creates server

cluster Storage Center objects for each node in the server cluster.

Workaround: None

DSM-9390 Creating an RDM for a VM hosted on an ESXi or vSphere host maps the volume to the server in the

cluster instead of the cluster object.

Workaround: Manually promote the volume to the ESXi server cluster mappings, then rescan for

hosts on the vCenter server.

Known Issues Related to the Storage Manager Client

The following known issues are related to the Storage Manager Client:

Table 30. Known Storage Manager Client Issues in Storage Manager 2019 R1

Issue Description

DSM-36674 When an SCv3000 Series storage system contains both an iSCSI I/O card and a mezzanine card, the

deployment wizard only shows the cabling diagram for the iSCSI I/O card.