Document Number: 680-021-021 Rev. L 2019 - 10 Storage Center 7.3 Release Notes This document describes the new features, enhancements, fixed issues, and open issues in Storage Center 7.3. Current Version: 7.3.20 Previous Version: 7.3.11 Topics: • • • • • • • • • Document Revision History Compatibility New in This Release Storage Center 7.3 Feature Availability and Licenses Storage Center 7.
• • • • SC5020 SC4020 SCv3000 Series SCv2000 Series NOTE: Storage Center 7.3 supports cabling mixed-speed expansion enclosures. SC400, SC420, and SC420F expansion enclosures can be cabled with SC200 and SC220 expansion enclosures. New in This Release The following features were added to Storage Center 7.3: Advanced Restripe Several enhancements have been made to the RAID restripe process to integrate and remove disks from a storage system.
Data-in-Place Migration Data-in-Place Migration is a new licensed feature in Storage Center 7.3.2 that can be used to upgrade an SC4020 storage system to an SC5020 or SC7020 storage system. Distributed Sparing Distributed sparing allocates spare disk space across all drives rather than reserving an entire drive as a spare. Distributed sparing enables the storage system to use all disks in a balanced and optimized manner, which ensures the fastest recovery time following a drive failure.
• • • • • • • SC8000 SC7020F SC7020 SC5020F SC5020 SC4020 SCv3000 Series SRA Improvements Changes made to SRA code and API resolve issues found in SRA operation, resulting in: • • • Improved SRA error handing and reporting. Better stability in multi-threaded environment. Resolution to generating duplicate volume IDs. Storage Manager 2018 R1 Storage Manager 2018 R1 or later is required to manage storage systems running Storage Center 7.3.
Licenses/Bundles Licensed Features • • • Replay Manager SED FIPS Secure Data Storage Manager Chargeback Storage Optimization Bundle • • Data Progression Fast Track Storage Protection Bundle • • • Live Volume and Live Volume with Auto Failover Remote Instant Replay (Replication), including Cross-Platform Replication Replay Manager Total Feature Bundle • • • • SED FIPS Secure Data Storage Manager Chargeback Storage Optimization Bundle Storage Protection Bundle SC8000 Features and Licenses The follo
Licenses/Bundles Licensed Features • • • • • • • • • Data Instant Replay (Snapshots) • Manual Replay (Snapshots) Multi-VLAN Tagging Remote Instant Replay (Replication), including Cross-Platform Replication Replay Manager SED FIPS Secure Data Storage Manager Chargeback Virtual Ports Volume QoS VVols SC7020 and SC5020 Features and Licenses The following licensed features and optional value-added bundles are supported on SC7020 and SC5020 storage systems: Licenses/Bundles Licensed Features Core Software
Licenses/Bundles Licensed Features • • • • • Dell Storage Manager Dynamic Capacity Dynamic Controllers Live Migrate Local Data Protection • • • • • Data Instant Replay (Snapshots) • Manual Replay (Snapshots) Multi-VLAN Tagging Virtual Ports Volume QoS VVols Optional Licenses • • • • • Live Volume and Live Volume with Auto Failover Remote Instant Replay (Replication), including Cross-Platform Replication Replay Manager SED FIPS Secure Data Storage Manager Chargeback Performance/Optimization Bundle •
Licenses/Bundles Licensed Features Total Feature Bundle • • • • SED FIPS Secure Data Storage Manager Chargeback Storage Optimization Bundle Storage Protection Bundle SCv2000 Series Features and Licenses The following licensed features are supported on SCv2000 series storage systems: Licenses/Bundles Licensed Features Core Licenses • • • • Dell Storage Manager Dynamic Capacity Dynamic Controllers Live Migrate Optional Licenses • • Flex Port Local Data Protection • • Data Instant Replay (Snapsho
Storage Center Scalability Guidelines The following scalability guidelines are the maximum recommended design guidelines for storage systems running Storage Center 7.3. Table 2.
Table 3.
Storage Center Object Supported Maximum NOTE: Data Instant Replay • is a licensed feature. • • • • Replications • • 1000 snapshot profiles 100 snapshot history profiles 100 snapshots per volume 100 consistency groups 25 volumes per consistency group 124 source replications 1000 target replications Fixed Issues The following sections summarize the issues fixed in Storage Center 7.3. Fixed Issues Related to Alerts and Reporting The following issues are fixed in Storage Center 7.3: Table 5.
Issue Description SCOS-18986 The Secure Console connection alert might fail to clear after Secure Console is disabled. Fixed Issues Related to Data Reduction The following issues are fixed in Storage Center 7.3: Table 8. Fixed Data Reduction Issues in Storage Center 7.3.20 Issue Description SCOS-54104 Deduplication might fail to occur on a storage system because the Data Optimazation Dedup Capable attributes are set to false after a storage system is updated to Storage Center 7.3.4 or later.
Issue Description SCOS-48621 In rare instances, deduplication and compression might erroneously return pagepool pages with incorrect tags, which cause payload error counts to be incremented on the pagepool freelist. SCOS-47507 Slow deduplication ingest rates might occur when multiple Storage Center processes are working on the same volume simultaneously. SCOS-46684 A controller might reset because of multiple small memory allocation requests.
Issue Description EH-1347 Storage Center might fail to recognize 10GBASE-T mezzanine cards if they are installed in SCv3000 series or SC5020 storage systems that were deployed without mezzanine cards. Table 17. Fixed Hardware Issues in Storage Center 7.3.2 Issue Description SCOS-51118 An SC9000 controller might reset because of alignment changes to the virtual address space.
Fixed Issues Related to Licensing, SupportAssist, and Updating The following issues are fixed in Storage Center 7.3: Table 19. Fixed Licensing, SupportAssist, and Updating Issues in Storage Center 7.3.11 Issue Description SCOS-54886 Storage Center might stop sending SupportAssist diagnostic data to CloudIQ if the Phone Home Daemon enters a recursive loop.
Issue Description the active storage controller. As a result, the storage controllers in the storage system might end up with different versions of the low-level firmware. SCOS-32283 On SCv2000 series and SC4020 storage systems, the Storage Center software might indicate that a prior version of software is available to install after performing a Storage Center ISO update.
Fixed Issues Related to Security The following issues are fixed in Storage Center 7.3: Table 29. Fixed Security Issues in Storage Center 7.3.20 Issue Description SCOS-48576 A security scan showed a possible vulnerability in the Apache software in the Storage Center management interface. Table 30. Fixed Security Issues in Storage Center 7.3.11 Issue Description SCOS-55131 Self-signed SSL certificates that the Storage Center generates have been identified as security vulnerabilities.
Issue Description SCOS-55713 View volumes cannot be created on a Storage Center if a user creates a traffic profile of the type Group with a name that starts with text 'Default'. SCOS-55306 Data progression might become suspended and fail to resume if DPM defrag and data progression are running simultaneously. SCOS-55267 SNMP is unable to retrieve information about the power supply and cooling fan modules on SC7020, SC5020, and SCv3000 series storage systems.
Table 34. Fixed Storage Management Issues in Storage Center 7.3.6 Issue Description SCOS-53212 A storage system using RAID rebalance might create a RAID device with an unexpectedly large stripe size. Table 35. Fixed Storage Management Issues in Storage Center 7.3.5 Issue Description SCOS-52932 A controller might reset if volumes with RAID copies are deleted during a RAID rebuild.
Issue Description SCOS-45755 The volume space consumption limit cannot be set above 2 TB using Storage Manager. SCOS-45304 Storage Center is unable to create a mapping profile for a volume that is mapped to a Linux server without an HBA. SCOS-45181 On SCv2000 series, SCv3000 series, SC4020, SC5020, and SC7020 storage systems, a controller might reset if a boot personality is detached and then the IPv6 address is removed from the embedded iSCSI ports.
Table 42. User Interface Issues Fixed in Storage Center 7.3.1 Issue Description SCOS-41051 When the Storage Manager Client is connected to a Storage Center through a Data Collector, the Storage Manager Client does not allow you to change the name of an enclosure and asset tag. SCOS-25031 After a controller failover, the peer controller might be reported as down by both SNMP and a Storage Manager Client that is directly connected to the peer controller.
Open Issues The following sections summarize the open issues in Storage Center 7.3. Open Issues Related to Alerts and Reporting The following open issues are related to alerts and reporting: Table 47. Open Alerts and Reporting Issues Issue Description SCOS-38226 In rare instances, a Sync LiveVolume Auto Failover alert is not cleared when the condition is corrected. Workaround: Use Storage Manager to manually acknowledge and clear the alert.
Issue Description Workaround: Remove the server from the cluster through the OS first. After the server is rebooted, remove the server object using Storage Manager. When a server is removed from one Storage Center only, or a volume is un-mapped on one Storage Center only, the persistent reservations might not stay consistent between primary volume and secondary volume. Workaround: When removing a server from a cluster or simply un-mapping a volume, follow the below order 1.
Open Issues Related to Vendors The following open issues are related to vendors: Table 53. Open Vendor Issues Issue Description SQAI-9 An ESXi 5.5 (Update 3b) host using FCoE and QLogic 8262 converged network adapters (CNAs) might cause the host to fail during controller failovers. Workaround: Update the QLogic firmware on the adapter. The QLogic firmware is available at https://www.dell.com/support/home/us/en/19/Drivers/DriversDetails?driverId=6RGDW.
Related Documentation The following documents are available for a storage system running Storage Center 7.3. • Storage Center Software Update Guide • Describes how to update Storage Center software from an earlier version to the current version. Storage Center Update Utility Administrator’s Guide • Describes how to use the Storage Center Update Utility to install Storage Center software updates.
© 2018 – 2019 Dell Inc. or its subsidiaries. All rights reserved. Dell, EMC, and other trademarks are trademarks of Dell Inc. or its subsidiaries. Other trademarks may be trademarks of their respective owners. 26 Storage Center 7.
Notes, cautions, and warnings NOTE: A NOTE indicates important information that helps you make better use of your product. CAUTION: A CAUTION indicates either potential damage to hardware or loss of data and tells you how to avoid the problem. WARNING: A WARNING indicates a potential for property damage, personal injury, or death. To contact Dell for sales, technical support, or customer service issues, go to Dell.com/support.