Administrator Guide
Table Of Contents
- 关于本指南
- Unisphere 和 Unisphere Central 2020 R1 管理员指南
- Unisphere 概览
- 使用入门
- Storage Center 概览
- Storage Center 部署
- Storage Center 管理
- Storage Center 服务器管理
- Storage Center 维护
- 管理 Storage Center 设置
- 配置 Storage Center 以继承设置
- 管理 Storage Center 用户和组
- 用户权限级别
- 用户组
- 用户帐户管理和验证
- 管理本地 Storage Center 用户
- 创建本地 Storage Center 用户
- 配置新 Storage Center 用户的默认用户首选项
- 增加本地 Storage Center 用户的权限级别
- 更改本地 Storage Center 用户的会话超时
- 更改 Storage Center 用户的首选语言
- 启用或禁用本地 Storage Center 用户的访问
- 修改本地 Storage Center 用户的本地组成员资格
- 配置本地 Storage Center 用户的首选项
- 修改关于本地 Storage Center 用户的描述性信息
- 更改本地 Storage Center 用户密码
- 删除本地 Storage Center 用户
- 还原删除的本地 Storage Center 用户
- 管理本地 Storage Center 用户组
- 管理本地 Storage Center 用户密码要求
- 启用目录服务验证
- 管理目录服务用户
- 管理目录用户组
- 管理前端 I/O 端口
- 管理后端 I/O 端口硬件
- 使用容错域对 Fibre Channel I/O 端口分组
- 使用容错域对 iSCSI I/O 端口分组
- 使用容错域对 SAS I/O 端口分组
- 管理磁盘和磁盘文件夹
- 管理安全数据
- 管理数据冗余
- 管理磁盘机柜
- 管理 Storage Center 控制器
- 更新 Storage Center
- 关闭和重新启动 Storage Center
- 管理现场可更换单元 (FRU)
- 远程 Storage Center 和复制 带宽控制
- Storage Center 复制和 Live Volume
- Storage Center 复制
- Storage Center Live Volume
- Live Volume 要求
- Live Volume 类型
- Live Volume 角色
- Live Volume 自动故障转移
- Live Volume 的受管复制
- 创建 Live Volume
- 修改 Live Volume
- 交换 Live Volume 的主要 Storage Center
- 取消 Storage Center 角色交换
- 更改 Live Volume 的传输类型
- 更改同步 Live Volume 的同步模式
- 向 Live Volume 添加受管复制
- 包含活动快照数据
- 为 Live Volume 启用或禁用重复数据消除
- 更改 Live Volume 的带宽控制
- 配置 Live Volume 以将数据写入到目标的最低层
- 允许将存储复制到最低层选择
- 允许 Live Volume 自动交换角色
- 将 Live Volume 还原为复制
- 暂停 Live Volume
- 恢复已暂停的 Live Volume
- 为 Live Volume 设置阈值警报定义
- 删除 Live Volume
- 手动使主要 Live Volume 联机
- 强制删除 Live Volume
- 使用自动故障转移修改 Live Volume
- Live Volume ALUA
- 监测 Live Volume
- Storage Center DR 准备和激活
- 查看 Storage Center 信息
- Storage Center 监测
- Storage Center 报告
- Data Collector 管理
- Data Collector 用户管理
- SupportAssist 管理
使用 Live Migrate 来迁移卷
Live Migration 会将卷从一个 Storage Center 移动到另一个 Storage Center,不需要停机。
Live Migration 要求
要创建 Live Migration,必须满足下表中列出的要求:
要求 说明
Storage Center 版本 源和目标 Storage Center 必须运行版本 7.1 或更高版本。
注: 戴尔建议两个 Storage Center 都运行相同版本的 Storage Center 软件。
Storage Center 许可证
无需额外许可证。
Unisphere Central 配置 必须将源和目标 Storage Center 添加至 Unisphere Central。
Storage Center 通信 源和目标 Storage Center 必须通过 Fibre Channel 或 iSCSI 连接,并且每个 Storage
Center 必须在另一个 Storage Center 上定义。
● 在源 Storage Center 上,目标 Storage Center 必须定义为远程 Storage
Center。
● 在目标 Storage Center 上,源 Storage Center 必须定义为远程 Storage
Center。
复制 带宽控制 复制带宽控制必须在源 Storage Center 上定义。
服务器
● 必须将源和目标 Storage Center 映射到服务器。
● 必须在目标服务器上启用的 MPIO 防止在实时迁移期间 I/O 中断。
Live Migration 角色
Live Migration 有两个角色:源和目标。这些角色决定活动的卷是否正在处理 I/O。角色可以交换一次,可以自动或手动进行。
在以下示例中,服务器发送一个修改源卷的 I/O 请求。对源卷所做的更改通过 Fibre Channel 或 iSCSI 复制到目标 Storage Center。
在 Live Migration 之前
在 Live Migration 之前,服务器只会向要迁移的卷发送 I/O 请求。
图 3: Live Migration 之前的配置示例
1. 服务器
2. 服务器 I/O 请求通过 Fibre Channel 或 iSCSI 发送到卷
3. 要迁移的卷
Storage Center 管理 65