Administrator Guide
4 In the right pane, click the Remote Expiration Rules tab.
5 Right-click the remote expiration rule to modify and select Edit Remote Snapshot Expiration.
The Edit Remote Snapshot Expiration dialog box opens.
6 Congure the remote snapshot expiration rule.
a In the Remote Expiration eld, specify the number of minutes, hours, days, or weeks to keep the remote snapshot before
deleting it.
b Click OK.
Managing Storage Proles
Storage Proles determine the RAID level and tiers on which data is stored.
NOTE: For user interface reference information, click Help.
Create a Storage Prole (Storage Center 7.2.1 and Earlier)
Create a storage prole to specify custom RAID level and tier settings that can be applied to one or more volumes.
Prerequisite
In the Storage Center User Volume Defaults, the Allow Storage Prole selection checkbox must be selected.
About this task
NOTE
: SCv2000 series controllers cannot create storage proles.
Steps
1 If the Storage Manager Client is connected to a Data Collector, select a Storage Center from the Storage view.
2 Click the Storage tab.
3 In the Storage tab navigation pane, select the Storage Proles node.
4 In the right pane, click Create Storage Prole.
The Create Storage Prole dialog box opens.
5 Congure the storage prole.
a Type a name for the storage prole in the Name eld.
b Select the RAID levels to use for volumes associated with the storage prole from the RAID Type Used drop-down menu.
c In the Storage Tiers area, select the checkboxes of the storage tiers (disk classes) that can be used for volumes associated with
the storage prole.
6 Click OK.
Create a Storage Prole (Storage Center 7.2.10 and Later)
Create a storage prole to specify custom RAID level and tier settings that can be applied to one or more volumes.
Prerequisite
In the Storage Center User Volume Defaults area, the Allow Storage Prole selection checkbox must be selected.
About this task
NOTE
: SCv2000 series controllers cannot create Storage Proles.
Steps
1 If the Storage Manager Client is connected to a Data Collector, select a Storage Center from the Storage view.
2 Click the Storage tab.
3 In the Storage tab navigation pane, select the Storage Proles node.
146
Storage Center Administration