Administrator Guide
Change the NDMP Password
A user name and password are required when conguring an NDMP server in the DMA. The default password is randomized and must be
changed prior to using NDMP.
1 In the Storage view, select a FluidFS cluster.
2 Click the File System tab.
3 In the File System view, click Cluster Connectivity.
4 Click the Backup tab.
5 In the NDMP pane, click Change Backup User Password.
The Change Backup User Password dialog box opens.
6 In the Password eld, type an NDMP password. The password must be at least seven characters long and contain three of the
following elements: a lowercase character, an uppercase character, a digit, or a special character (such as +, ?, or ∗).
7 In the Conrm Password eld, retype the NDMP password.
8 Click OK.
Change the NDMP User Name
A user name and password are required when conguring an NDMP server in the DMA. By default, the user name is backup_user. You can
change this user name if needed.
1 In the Storage view, select a FluidFS cluster.
2 Click the File System tab.
3 In the File System view, click Cluster Connectivity.
4 Click the Backups tab.
5 In the NDMP pane, click Edit Settings.
The Edit NDMP Settings dialog box opens.
6 In the Backup User eld, type a new NDMP user name.
7 Click OK.
Change the NDMP Client Port
By default, the NDMP server monitors port 10000 for incoming connections. You can change the client port to match the port used by the
DMA.
1 In the Storage view, select a FluidFS cluster.
2 Click the File System tab.
3 In the File System view, click Cluster Connectivity.
4 Click the Backup tab.
5 In the NDMP pane, click Edit Settings.
The Edit NDMP Settings dialog box opens.
6 In the NDMP Port eld, type a new client port.
7 Click OK.
Specifying NAS Volumes Using the DMA
To perform backup and restore operations, the DMA server must be congured to be able to access the FluidFS cluster.
On each DMA server, you must congure the following components:
• Client VIP (or a DNS name) that the DMA server accesses. If you change the client VIP, you must also make the appropriate change on
the DMA servers.
456
FluidFS Administration