Administrator Guide

d Push the handle toward the front of the appliance until it locks.
6 Reconnect all cables to the same ports on the new NAS controller. The NAS controller automatically powers on if at least one power
supply is connected to a power source.
7 Attach the new NAS controller.
Managing Service Packs
The FluidFS cluster uses a service pack methodology to upgrade the FluidFS software. Service packs are cumulative, meaning that each
service pack includes all xes and enhancements provided in earlier service packs.
View the Update History
View a list of service pack updates that have been installed on the FluidFS cluster.
1 In the Storage view, select a FluidFS cluster.
2 Click the File System tab.
3 In the File System tab navigation pane, select Cluster Maintenance.
4 In the right pane, click the Software Versions tab. The update history for the FluidFS cluster is displayed.
Receive Email Notications for Available Updates
Storage Manager can send an email to notify you when a FluidFS service pack update is available. Storage Manager will send only one alert
email for every 24 hour period.
Prerequisite
Storage Manager must be congured to send diagnostic data using SupportAssist.
Steps
1 Congure the SMTP settings for the Data Collector.
a In the top pane of the Storage Manager Client, click Edit Data Collector Settings. The Edit Data Collector Settings dialog box
appears.
b Click the SMTP Server tab.
c In the From Email Address eld, enter the email address to display as the sender of emails from the Data Collector.
d In the Host or IP Address eld, enter the host name or IP address of the SMTP server.
e If the port number of the SMTP server is not 25, enter the correct port number in the Port eld.
f If the SMTP server requires authentication, select the Authentication check box, then enter the username and password in the
SMTP User Name and SMTP User Password elds.
g Click OK.
2 Congure an email address for your Storage Manager user account.
a In the top pane of the Storage Manager Client, click Edit User Settings. The General tab of the Edit User Settings dialog box
appears.
b Enter the email address of the current user in the Email Address eld.
c Select the format for emails to the current user from the Email Format drop-down menu.
d To send a test message to the email address, click Test Email and click OK.
e Verify that the test message is sent to the specied email address.
f Click OK.
3 Congure email notications to receive email notications for available FluidFS service pack upgrades.
a In the top pane of the Storage Manager Client, click Edit User Settings. The Edit User Settings dialog box appears.
b Click the Manage Events tab.
c Select the checkbox for the event.
d Click OK.
FluidFS Administration
483