Administrator Guide
• To allow access to a Storage Center user privilege level, select User Privilege Level, then select a privilege level from the drop-
down menu.
• To allow access to an individual Storage Center user, select Specic User, then select a user from the drop-down menu.
7 Specify which source IP addresses to allow.
NOTE: If network address translation (NAT) is enabled in your network environment, be sure to specify the IP address(es)
visible to the Storage Center.
• To allow all source IP addresses, select All Hosts.
• To allow access to a specic IP address, select Single IP Address, then type the IP address in the eld.
• To allow access to a range of IP addresses, select Range of IP Addresses, then type the rst and last IP addresses in the elds.
8 Click OK.
Modify an Access Filter for a Storage Center
Modify an access lter to change the users or IP addresses it allows.
1 If you are connected to a Data Collector, select a Storage Center from the drop-down list in the left navigation pane.
2 Click Summary.
The Summary view is displayed.
3 Click (Settings).
The Storage Center Settings dialog box opens.
4 Click the IP Filtering tab.
5 Select the access lter that you want to modify, then click Modify Filter.
The Modify IP Filter dialog box opens.
6 Modify the access lter settings as needed. For user interface reference information, click Help.
7 (Optional) Modify the allowed Storage Center user or user privilege level.
• To allow access to a Storage Center user privilege level, select User Privilege Level, then select a privilege level from the drop-
down menu.
• To allow access to an individual Storage Center user, select Specic User, then select a user from the drop-down menu.
8 (Optional) Modify the allowed source IP addresses.
NOTE
: If network address translation (NAT) is enabled in your network environment, be sure to specify the IP address(es)
visible to the Storage Center.
• To allow all source IP addresses, select All Hosts.
• To allow access to a specic IP address, select Single IP Address, then type the IP address in the eld.
• To allow access to a range of IP addresses, select Range of IP Addresses, then type the rst and last IP addresses in the elds.
9 Click OK.
Delete an Access Filter for a Storage Center
Delete an access lter if it is no longer needed or you want to revoke administrative access to the users and IP addresses that the lter
matches.
1 If you are connected to a Data Collector, select a Storage Center from the drop-down list in the left navigation pane.
2 Click Summary.
The Summary view is displayed.
3 Click (Settings).
The Storage Center Settings dialog box opens.
4 Click the IP Filtering tab.
110
Storage Center Maintenance