Reference Guide

Species additional, protocol- and device-specic information by which to lter the display.
–server string
Species the index of the server host for the port/HBA by which to lter the display.
–servername string
Species the name of the server host for the port/HBA by which to lter the display.
–status string
Species the operational status of the server port/HBA by which to lter the display. Valid values are:
• Up
• Down
–txt filename
Species a text le in which to save output.
–wwn string
Species the remote port Initiator name or the World Wide Name (WWN) for the server port/HBA by which to lter the display.
–xml filename
Species an xml le in which to save output.
Output
For each Storage Center server, the following information is output to the console in table format.
Output
Description
WWN Shows the World Wide Name (WWN) for the server port/HBA (set at the Initiator) or the Port Name
of a discovered iSCSI port.
Server Shows the index of the server host for this port/HBA.
ServerName Shows the name of the server host for this port/HBA.
Status Shows the operational status of this Server port/HBA.
ConnectStatus Shows the status of the transport connection between the server port/HBA and the Storage Center.
HBAType Shows the transport type of the server port/HBA.
iSCSI_Name Shows the unique iSCSI network name for the server port/HBA.
IPAddress Shows the IP address for the iSCSI server port/HBA.
PortInfo Shows additional, protocol and device-specic information for the specied server port/HBA.
serverfolder create
Description
Creates a server folder.
60
Command Reference