Administrator Guide

Enable or Disable Access for a Directory Service User
When a directory service user is disabled, the user is not allowed to log in.
Steps
1. If you are connected to a Data Collector, select a Storage Center from the drop-down list in the left navigation pane of
Unisphere Central.
2. Click
Summary.
The Summary view is displayed.
3.
Click (Settings).
The Storage Center Settings dialog box opens.
4. Click the Users and User Groups tab.
5. On the Directory Users subtab, select the user, then click Settings.
The Edit Settings dialog box opens.
6. Enable or disable access for the directory service user.
● To enable access, select the Enabled checkbox.
● To disable access, clear the Enabled checkbox.
7. Click OK.
The local user Edit Settings dialog box closes.
8. Click OK.
Modify Local Group Membership for a Directory Service User
User groups grant access to volume, server, and disk folders for users with the Volume Manager or Reporter privilege level.
Prerequisites
● The directory service user must have been individually granted access to the Storage Center. Users that have been granted
access based on a directory group inherit local group membership from the directory group settings.
Steps
1. If you are connected to a Data Collector, select a Storage Center from the drop-down list in the left navigation pane of
Unisphere Central.
2. Click
Summary.
The Summary view is displayed.
3. Click (Settings).
The Storage Center Settings dialog box opens.
4. Click the Users and User Groups tab.
5. On the Directory Users subtab, select the user, then click Settings.
The Edit Settings dialog box opens.
6. Modify local group membership for the user.
a. In the Local User Groups area, click Change.
The Select Local User Groups dialog box opens.
b. (Optional) To create a new local user group, click Create Local User Group, then complete the Create Local User
Group wizard. For user interface reference information, click Help.
c. Select the checkbox for each local user group you want to associate with the local user.
d. To remove the local user from a local group, clear the checkbox for the group.
e. Click OK.
The Select Local User Groups dialog box closes.
7. Click OK.
The local user Edit Settings dialog box closes.
8. Click OK.
Storage Center Maintenance
155